Spoon Calipers On An S2000

[ludecrs]

Does anyone here know if I can run a set of Spoon calipers on an 18x7.5 +45 offset for an S2000?

I think I'll need a 10mm spacer for this application, and maybe even extended studs as teh BBS wheels are flat surfaced.

And do you think, if I ran the 10mm spacer, the wheels would look rediculous sticking out an extra 1cm or so?

Your thoughts please?

http://www.supercars.net/pitlane/pics/3319707a.jpg
http://www.supercars.net/pitlane/pics/160877/3319707d.jpg
http://www.supercars.net/pitlane/pics/160877/3319707c.jpg
http://www.supercars.net/pitlane/pics/160877/1371678c.jpg
http://www.supercars.net/pitlane/pics/160877/1371678b.jpg
http://www.supercars.net/pitlane/pics/160877/1371678d.jpg
http://www.supercars.net/pitlane/pics/160877/3319707c.jpg

[Benson]

NO chance judging from the 2nd pic.

[ludecrs]

Hence the spacer question my friend. :)

[fatboyz39]

maybe with 15mm spacer.

[mercury]

hi ludec,

you might find this thread useful:

http://s2ki.com/forums/index.php?showtopic=338881

[ludecrs]

I was the last person to post in that thread already :)

[chargeR]

A friend of mine ran a 17x7.5 +29 with a 215 tyre on the front of his s2k with rolled and lightly flared front guards and some camber and it cleared so you can make your rims work with the spacers if you are willing. His car was probably slightly higher than yours though.