Torque Specs

[stk-civic]

hey guys,
im currently replacing my clutch and now im stuck, and i call on youz for help :D
I have a D16A8 from a 88 crx, wat are the torque specifications from the flywheel to the clutch?? (the 6 bolts that go round the outside of the fly)
My manual says its 87lbs but my mate rekons thats way to much coz his 180sx is at 22lbs, considering its a more powerful and bigger engine, it just sounds way to extreme.
Thanks for your help in advance

[vinnY]

follow the manual

[fatboyz39]

87llb is for the flywheel bolts. Yes your mate is right.

Should be around 20-22lb for the clutch to flywheel bolts.

[BlitZ]

BTW guys... its not clutch.. its pressure plate!

just make sure u boys are all talkin about lbs..

those pressure plate bolts are on really light... from member its ~20NM.. not sure about lbs

[fatboyz39]

My ones are in foot pounds. LOL

[czy_sol87]

have a look here
http://www.honda-tech.com/zerothread?id=953151

[stk-civic]

thanx thanx...Got it...its 19lbs-ft
Yeah pressure plate, my bad
and pounds coz its easier to use on the torque wrench, it also has nm figures too.