recaro seats

[iwantvtec]

was jus wondering if i can use my stock eg rails for dc2r recaros. if so how do i remove the stock seat from the rails.

[g_kn]

For Stock EG rails for dc2r recaros, dnt think it will fit .. you will need the DC2R Rails then straight fit

[MikeyG]

what about ek rails??? would ek9 recaros fit straight on or need ek9 rails?

[iwantvtec]

ive got my mates dc2r rails n dey straight fit but d retard gave me d passenger side rails.

[g_kn]

what about ek rails??? would ek9 recaros fit straight on or need ek9 rails?

think you can use DC2R rails for EK9 recaros.. not sure though

[iwantvtec]

how do i remove seat from my stock rails.

[Encor3]

you'll need dc2r rails to fit into eg.
Ek's you'll need ek9 rails to fit into EK's

you cant use your stock rails (not including R's) rails for recaros.

removing stock rails... err just turn the seat upside down and undo the 10mm bolts.. not exactly rocket science

[VTECMACHINE]

You'll need DC2R (Recaro) rails to fit the recaros.

If you don't have the rails, I think JDM concept (www.jdmconcept.com.au) supplies them. They aren't too exxy.

[Rivic]

how do i remove seat from my stock rails.


take it outta the car, flip it over, undo all the bolts where u can see its bolted (this weill mean taking out and undo-ing the bolts on the side leaver bit where it reclines) and it should come off..

[mr180sx]

You can use dc2r rails for Ek. Just have to egg one hole out



think you can use DC2R rails for EK9 recaros.. not sure though

[simonnowis]

to my knowledge the recaro bottom mounting onto rails is the same dc2r or ek9. its the actual rails mounting on to the chasis that is different. in terms of putting in dc2r rails into and ek i think theres one hole that doesnt line up.