nut for door trim w/ pictures

[MWAKU]

um anyone know where i can get one? or what kinda of nut/screw it uses..

i don't have one for my door trim, like, the part where, above the speaker, and when u close the door, its hidden. it looks like a 1.5cm nut. i have it for my LHS door, but not the driver side.. it rattles when music plays, gets frustrating :)

http://i13.photobucket.com/albums/a285/mykulxD/15-07-08_171289.jpg
this is the screw - on the door with it
http://i13.photobucket.com/albums/a285/mykulxD/15-07-08_1632.jpg
this is the door missing it..

[baeshin]

touch up paint??

small can around 15bux .. bigger can 25bux

[MWAKU]

bump for nut?

[vinnY]

take out the left side, check the size and screw it back in?
chances are its something like an m6 15mm nut

[Zdster]

take out the left side, check the size and screw it back in?
chances are its something like an m6 15mm nut

Or at least take a photo so we have some idea of what you are talking about.

[MWAKU]

ok. yeah i tried to take it out last night. doesnt seem to unscrew, the outside is holding the screw in

(o) like o is the screw and the () is the thing holding it in.. anyways yeah. where do i pick one of the screws up from.. i fiddled with some screws last night, nothing worked..

but yeah, take picture later. so cold outside atm..

[Zdster]

ok. yeah i tried to take it out last night. doesnt seem to unscrew, the outside is holding the screw in

(o) like o is the screw and the () is the thing holding it in.. anyways yeah. where do i pick one of the screws up from.. i fiddled with some screws last night, nothing worked..

but yeah, take picture later. so cold outside atm..

Is the top of the 'screw' flat? If so, you need to get a flat head screwdriver and slide it between the flat piece and the bottom of the screw. Once you wedge the head of the driver in, twist it 90 degrees and the head will pop out. Then you can remove the screw, take it to honda or a wreckers and get a replacement.

[MWAKU]

oh ok. nah its not flat, its got the 'x' lols. yeah i think i'd should jst go wreckers

[MWAKU]

bump1234

[Simmo2302]

if you can get it out take it to a nut & bolt shop and ask for another of the same, that is if it is a metal screw and not a plastic plug thingy.

[vinnY]

oh dude its like a door trim piece
just go to repco/autobarn/supercheapauto and find a replacement
usually found on racks in little blister packs, brand's like champion or something

[MWAKU]

oh ok thanks vin. hum yeah, i dnno, the hole doesn't really look like a screw, looks like a plug, its just a square hole.., but i'll try see what happens.

[vinnY]

if you really can't take our word for it
get a philips head, screw it until theres about 5mm of thread
grab the screw and pull, the whole thing will pop out for you to see

[phwoaaa]

umm i dont think its a screw.. its one of those ones that lock itself in and expand .. if u unscrew it abit and pull it should pop straight out.. iv taken mine out a fair few times.. i think i havnt even put mine back on , on driver side door yet.. i dont think it affects the rattling...

[MWAKU]

well it does.. i held the it down, and no rattling. and put my hand on it softly.. no ratting..

it vibrates onto the dashboard side.. and thats y it makes a rattle sound..