skunk2 head on stock block and ecu

[d0odle]

hey guys i was wondering if my car would run if i put a skunk2 head (stage 2 cams, valve springs, retainers, standard size valves) on a stock b18cR block and running stock ecu. Would my car be able to run?

[DLO01]

It will run, but you really should get it tunned.

[d0odle]

you think i could run a vafc tuned until i can afford a hondata

[d0odle]

further help would be great :)

[ACTI0NMAN-1]

yes it would run, a little lumpy tho, and i would suggest only running premium.

[delsol9000rpms]

it will runn... but it will be roughh and id suggest not to drive it unless yu absolutely have to while its untuned.

[dsp26]

as the above 2 said... the Americans do it all the time and can be read heaps from Honda-Tech... the issue is the lumpy idle... and from all accounts a good tune with a vafc will still have a slightly lumpy idle.

no the above info isn't personal experience, only from research as i was going to get them.

[d0odle]

thanks guys :) most likely be running hondata soon anyways

[delsol9000rpms]

hondata ftw bro.. you wont look back

[d0odle]

yea i might have a hondata s300 on the way

[yah mum]

car will run, but the question is can u drive it:)

[Benson]

hondata or crome ! don't take any shorcuts do it right the first time