View Full Version : skunk2 head on stock block and ecu
d0odle
20-07-2008, 05:46 PM
hey guys i was wondering if my car would run if i put a skunk2 head (stage 2 cams, valve springs, retainers, standard size valves) on a stock b18cR block and running stock ecu. Would my car be able to run?
DLO01
20-07-2008, 05:58 PM
It will run, but you really should get it tunned.
d0odle
20-07-2008, 06:13 PM
you think i could run a vafc tuned until i can afford a hondata
d0odle
22-07-2008, 11:21 PM
further help would be great :)
ACTI0NMAN-1
22-07-2008, 11:23 PM
yes it would run, a little lumpy tho, and i would suggest only running premium.
delsol9000rpms
22-07-2008, 11:41 PM
it will runn... but it will be roughh and id suggest not to drive it unless yu absolutely have to while its untuned.
dsp26
23-07-2008, 06:52 PM
as the above 2 said... the Americans do it all the time and can be read heaps from Honda-Tech... the issue is the lumpy idle... and from all accounts a good tune with a vafc will still have a slightly lumpy idle.
no the above info isn't personal experience, only from research as i was going to get them.
d0odle
26-07-2008, 11:11 AM
thanks guys :) most likely be running hondata soon anyways
delsol9000rpms
28-07-2008, 09:41 PM
hondata ftw bro.. you wont look back
d0odle
28-07-2008, 09:49 PM
yea i might have a hondata s300 on the way
yah mum
28-07-2008, 10:33 PM
car will run, but the question is can u drive it:)
Benson
30-07-2008, 10:51 AM
hondata or crome ! don't take any shorcuts do it right the first time
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.