[CL9] Ingalls Rear Camber Kit

[kingfoo]

Hey all,

I just got the Ingalls rear camber kit for my CL9 from the US and was wondering if anyone had pics of their ones installed. I have a feeling I might have got the wrong one.

Thanks in advance.

[Crapdaz]

Hey all,

I just got the Ingalls rear camber kit for my CL9 from the US and was wondering if anyone had pics of their ones installed. I have a feeling I might have got the wrong one.

Thanks in advance.

hey sorry cant provide you with pics cause im still recovering from surgery.

But what part number did you get from the boxes? they should be these ones part no. 38725

http://www.heeltoeauto.com/Ingalls-Camber-Kit-CL7-9-TSX-04-08-Rear-ONE-SIDE-38725-pr-50002.html

You need 2 lots of these to be able to fit onto your car as you have two sides.

1 arm - longer in length is for toe arm adjustment (the 1st arm you see underneath the car closest to the rear)
2 arm - shorter in length is for camber adjustment (arm is further in and slightly higher up)

BTW This has been covered before about the camber kit. Just need to do a search and when looking for camberkit you should be looking at Part no. and for TSX

Hope this helps.
Darren

[achia]

Hmm.. I want to order a set too but i notice some of them has a different part no.

This one show the installation diagram has 2 arm and one for each side. I would assume that this will only adjust camber setting but not toe.

http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__INGALLS-REAR-CAMBER-KIT-03-07-HONDA-ACCORD-CL-TL-TSX_W0QQitemZ180269011407QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item180269011407

This one show the installation diagram has 2 arm for each side and I would assume that this will be able to adjust the camber and toe.

http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__HONDA-ACCORD-ACURA-CL-TL-INGALLS-REAR-CAMBER-KIT-KITS_W0QQitemZ330255105149QQadnZCarQ20Q26Q20TruckQ 20PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewIte m?hash=item330255105149

[Crapdaz]

I think those two links you posted up are the same ingalls only comes 2 arms for 1 kit(1 side).

2 arms (1 kit) will make it easier for the alignment guy to deal with it as toe gets affected by camber adjustment + vice versa.

[kingfoo]

Hope this helps.

It certainly did. I do have the correct ones. What made me question it was when I looked at my rear suspension and could only see where one of the arms would go.

Thanks heaps.

[kingfoo]

This one show the installation diagram has 2 arm for each side and I would assume that this will be able to adjust the camber and toe.

http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__HONDA-ACCORD-ACURA-CL-TL-INGALLS-REAR-CAMBER-KIT-KITS_W0QQitemZ330255105149QQadnZCarQ20Q26Q20TruckQ 20PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewIte m?hash=item330255105149

^^^ That's who I got mine from, Import Auto Performance. I purchased it through their website though, http://www.iapdirect.com, as opposed to Ebay. With shipping and currency converted to New Zealand dollars it was alot cheaper then getting it from an Aussie supplier.

[aaronng]

This the one I bought. http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__03-HONDA-ACCORD-ACURA-TL-TSX-INGALLS-REAR-CAMBER-KIT_W0QQitemZ230274612076QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item230274612076
Comes with 4 arms.

[mreuro4]

Hey all,

I just fitted this morning a Wicked Tuning camber kit from US Ebay. Cost $130 delivered AUD. Details are in link. I have to say very easy adjustment and excellent quality. Cheers.

http://cgi.ebay.com/ebaymotors/WICKED-REAR-CAMBER-KIT-03-07-HONDA-ACCORD-ACURA-TSX-RD_W0QQcmdZViewItemQQcategoryZ33581QQihZ010QQitemZ 200241429936QQrdZ1QQsspagenameZWDVW

[achia]

^^^ That's who I got mine from, Import Auto Performance. I purchased it through their website though, http://www.iapdirect.com, as opposed to Ebay. With shipping and currency converted to New Zealand dollars it was alot cheaper then getting it from an Aussie supplier.

Cool... have you install it??

[achia]

This the one I bought. http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__03-HONDA-ACCORD-ACURA-TL-TSX-INGALLS-REAR-CAMBER-KIT_W0QQitemZ230274612076QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item230274612076
Comes with 4 arms.

Thanks for the info aaronng.... will place an order with them very soon.. :)

[kingfoo]

I was supposed to install it tomorrow but it's very bad weather here and I don't have a shed. So I will have to do it next week.

[hooyn]

just to make absolute certainty.

i need 4 arms right ?

[Crapdaz]

just to make absolute certainty.

i need 4 arms right ?

yes two for the camber and two for the toe.

the toe should be the shorter arm i think, can't remember.


Below is the thread of my car, the last image on the 1st post shows the left rear of the ingalls camber kit.
http://www.ozhonda.com/forum/showthread.php?t=100069

Hope this helps.

[hooyn]

yeap i see it
so if ill need to get 2 of these kits
http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__03-HONDA-ACCORD-ACURA-TL-TSX-INGALLS-REAR-CAMBER-KIT_W0QQitemZ230274612076QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item230274612076

[Crapdaz]

No, that link looks like the price for a set of 2 already.

Clarify with the seller how many do you need to suit the car.
As when i bought it i thought you only need 1 set cause the image shows 2 arms already.

Since i bought them ages ago, i think i bought them at around $200AUD shipped. <-- can't remember i can check when i get home.

[aaronng]

No, that link looks like the price for a set of 2 already.

Clarify with the seller how many do you need to suit the car.
As when i bought it i thought you only need 1 set cause the image shows 2 arms already.

Since i bought them ages ago, i think i bought them at around $200AUD shipped. <-- can't remember i can check when i get home.
Yeah, IAP sends the whole set 4 pieces of arms. I bought my set from them.
I got mine for $225 landed when the rate was 0.8. So you won't get anything close with the current exchange rate.

[felixd]

can anybody suggest me where to get the ingalls camber kit in here ? not overseas ? since the australian dollars dropped :(

[aaronng]

can anybody suggest me where to get the ingalls camber kit in here ? not overseas ? since the australian dollars dropped :(

Even locally, the price would have gone up because the sellers still have to buy the kit from Ingalls USA. Keep a lookout for 2nd hand ones.

[Crapdaz]

can anybody suggest me where to get the ingalls camber kit in here ? not overseas ? since the australian dollars dropped :(

i think jdmyard sells them for $250 if i am incorrect blame aaron. :p

sorry they are selling it AUD$295.00.
www.heeltoeauto.com (http://www.heeltoeauto.com) or www.iapdirect.com (http://www.iapdirect.com)

[felixd]

camber kit for this car is so damm rare !!! n hard to find ey

[Crapdaz]

camber kit for this car is so damm rare !!! n hard to find ey

IAP or heeltoe would be the way to go.

[felixd]

IAP or heeltoe would be the way to go.

is dat the traders here ? if yes i cannot find it :P

[.QD]

jdmyard doesnt have stock....

i got mine from IAP through their ebay shop.

[aaronng]

camber kit for this car is so damm rare !!! n hard to find ey

Almost every lowered Euro with proper rear camber has a set (ingalls or eibach/spc) :p

[ADM13R]

hey i have the camber kit on and i got mine from us aswell. if its for cl9 then its right. it should have 4 arms altogether one for camber and one for toe on each side. straightened my wheels out from -5 camber to -1