confusion on mounting front lip

[Raztaz]

I have a EK1 00' facelift model and im clueless on how the front lip stays on :confused:
Ive looked at the DIY guide
http://www.ozhonda.com/forum/showthread.php?t=54436&highlight=front+lip
My lip i got form modproject doesnt have holes on it, how do i mount the clips? The clips i got have a hole thats too big or too small to be mounted on the front bar HELP :(

one of the clips
http://img.photobucket.com/albums/v363/{CDC}Typhoid/DSCN0239-1.jpg

someone around melb wana help me put it on? lol

[jdm_kid]

the lip you prob brought is a aftermarket one. meaning its not oem and wouldnt have oem fitment. the clips are useless. your gunna have to DIY mounting. there 2 ways to install it. use rivets or use glue.

[Raztaz]

would automotive tape be strong enough to hold it there without falling off while driving?

[jdm_kid]

prob not ? it will prob fall off after leaving it in the sun ..

[Raztaz]

wouldn glue damage the paint if i for example, took off the lip later in the future? or is there glue i can use safely on a car...

[hisoka]

drill holes man ~and use zip ties~glue always comes of on one side, so your driving with one side on and one side off~

[xtat1k]

sikaflex + screws.

[kn1ghtm4r3]

drill the sides in =9

two screws each side ( left and right), depending on how flush the lip is, it will or will not need glue/ or tape in the middle, u be the judge after you screw the sides and if ur not happy then diy the middle with the suggestions above.

otherwise just take it to a body shop if u cbf lol.

[Raztaz]

drill the sides in =9

two screws each side ( left and right), depending on how flush the lip is, it will or will not need glue/ or tape in the middle, u be the judge after you screw the sides and if ur not happy then diy the middle with the suggestions above.

otherwise just take it to a body shop if u cbf lol.

how would the body shop do it? drill/screw or sikaflex it on?

thnx for the help guys :D

[jdm_kid]

how would the body shop do it? drill/screw or sikaflex it on?

thnx for the help guys :D

sifaflex is the glue they use to install body kits. it wont damage your paint or anything, its just abit hard to remove thats all

[Zdster]

Just use 3M double sided adhesive (there is a special one you can get) and use screws. It is very straight forward.