2009 Euro Switchblade key mod

[pesad42]

http://img355.imageshack.us/img355/4991/819c1uc3.th.jpg (http://img355.imageshack.us/my.php?image=819c1uc3.jpg)

i got this to work with my new 08 euro cost me $150 it looks grate its got lock/unlock/boot/panic
$30 for the key
$65 to cut the key
$55 to program the remote

[viper8548]

I thought the frequency of the TSX remote is different to the one we have here in Aus?

[johnnyofhk]

I thought the frequency of the TSX remote is different to the one we have here in Aus?

did you buy the 07TL key or 09TSX? coz i am using it without remote function~ i hope by installing another alarm system to suit the frequency

PS the au honda remote frequency is 4xxMHz when the acura one is 3XXMHz,

[Mike Star]

http://img355.imageshack.us/img355/4991/819c1uc3.th.jpg (http://img355.imageshack.us/my.php?image=819c1uc3.jpg)

i got this to work with my new 08 euro cost me $150 it looks grate its got lock/unlock/boot/panic
$30 for the key
$65 to cut the key
$55 to program the remote

Hi there. The switchblade key looks great!
Where did you get it from?
Will it work with a MY06 Euro Luxury?
Thanks

[UNLS1]

$150 just for a key that acts like a switchblade.

really its just 150 for a button and a spring.

not my cup of tea but each to their own!

[viper8548]

http://img355.imageshack.us/img355/4991/819c1uc3.th.jpg (http://img355.imageshack.us/my.php?image=819c1uc3.jpg)

i got this to work with my new 08 euro cost me $150 it looks grate its got lock/unlock/boot/panic
$30 for the key
$65 to cut the key
$55 to program the remote

You can actually get it cut for cheaper if that makes a difference, I remember reading the other thread of the non-oem flip key that you can get cuts for aruond $40.

[johnnyofhk]

You can actually get it cut for cheaper if that makes a difference, I remember reading the other thread of the non-oem flip key that you can get cuts for aruond $40.

i got mine cut 50, it doesn't matter right? But does it work?

[tron07]

These type of key would last long for me... I will keep springing it on and off (sub-consciously) when bored and the spring going to break or pop very fast.

[viper8548]

Oh i was just trying to say it could be cheaper than $150

[REK13S]

http://img355.imageshack.us/img355/4991/819c1uc3.th.jpg (http://img355.imageshack.us/my.php?image=819c1uc3.jpg)

i got this to work with my new 08 euro cost me $150 it looks grate its got lock/unlock/boot/panic
$30 for the key
$65 to cut the key
$55 to program the remote

where did you buy this key from

[power_of_dreams]

$150 just for a key that acts like a switchblade.

really its just 150 for a button and a spring.

not my cup of tea but each to their own!

Let's just say that if I had $150 to spend, I wouldn't spend it on a key!

[pesad42]

I thought the frequency of the TSX remote is different to the one we have here in Aus?

this is the tsx key

this not just a key you also get panic button and also lot better in quality than the the standard key or the switchblade mod that u can buy form sydney seller

where to buy
http://stores.ebay.com/ACURA-OF-PEORIA_Acura_TSX_W0QQcolZ4QQdirZ1QQfsubZ6021258QQf tidZ2QQtZkm



the only thing you should worry about is the FCC and IC numbers if it matches its then no problem sometimes your lock would work but wont start the car then you have to take out the immobilizer bit form your old key and put it into Ur new key

The FCC ID for this key is MLBHL1K-1T. The IC number is 2500A-HL1K1T.

main thing key less entry is different thing so there are two parts
1.door locks and key less entry
2.immobilizer bit for the car

[xsite85]

this is the tsx key

this not just a key you also get panic button and also lot better in quality than the the standard key or the switchblade mod that u can buy form sydney seller

where to buy
http://stores.ebay.com/ACURA-OF-PEORIA_Acura_TSX_W0QQcolZ4QQdirZ1QQfsubZ6021258QQf tidZ2QQtZkm



the only thing you should worry about is the FCC and IC numbers if it matches its then no problem sometimes your lock would work but wont start the car then you have to take out the immobilizer bit form your old key and put it into Ur new key

The FCC ID for this key is MLBHL1K-1T. The IC number is 2500A-HL1K1T.

main thing key less entry is different thing so there are two parts
1.door locks and key less entry
2.immobilizer bit for the car

1. where might you find this FCC ID and IC number, is it in our manual?
2. which mode would AUS be running off memory 1 or memory 2?

[johnnyofhk]

1. where might you find this FCC ID and IC number, is it in our manual?
2. which mode would AUS be running off memory 1 or memory 2?

but as pesad42 said, he is using it right now, right? so the id and ic number donesn't matter anymore.

However, I got a story to tell.

I bought a 07TL switchblade key from ebay (look exactly the same as pesad42's) I got it cut and programmed the immobilize chip by dealer, however the frequency of the key is NOT same as our AccordEuro, so the remote function CANNOT be use.

[johnnyofhk]

this is the tsx key

this not just a key you also get panic button and also lot better in quality than the the standard key or the switchblade mod that u can buy form sydney seller

where to buy
http://stores.ebay.com/ACURA-OF-PEORIA_Acura_TSX_W0QQcolZ4QQdirZ1QQfsubZ6021258QQf tidZ2QQtZkm



the only thing you should worry about is the FCC and IC numbers if it matches its then no problem sometimes your lock would work but wont start the car then you have to take out the immobilizer bit form your old key and put it into Ur new key

The FCC ID for this key is MLBHL1K-1T. The IC number is 2500A-HL1K1T.

main thing key less entry is different thing so there are two parts
1.door locks and key less entry
2.immobilizer bit for the car

I think the door locks and keyless entry are different part as well.
coz i could unlock and lock the door, but keyless entry

http://members.iinet.net.au/~johnnytam/cl9/key01.gif
my switchblade key pic1


http://members.iinet.net.au/~johnnytam/cl9/key03.gif
my switchblade key pic2


http://members.iinet.net.au/~johnnytam/cl9/key02.gif
oz honda's original key

[pesad42]

http://img177.imageshack.us/img177/6035/28072008152bk5.th.jpg (http://img177.imageshack.us/my.php?image=28072008152bk5.jpg)


this is the tsx key

this not just a key you also get panic button and also lot better in quality than the the standard key or the switchblade mod that u can buy form sydney seller

where to buy
http://stores.ebay.com/ACURA-OF-PEORIA_Acura_TSX_W0QQcolZ4QQdirZ1QQfsubZ6021258QQf tidZ2QQtZkm



the only thing you should worry about is the FCC and IC numbers if it matches its then no problem sometimes your lock would work but wont start the car then you have to take out the immobilizer bit form your old key and put it into Ur new key

The FCC ID for this key is MLBHL1K-1T. The IC number is 2500A-HL1K1T.

main thing key less entry is different thing so there are two parts
1.door locks and key less entry
2.immobilizer bit for the car

[viper8548]

i really don't like the left (non-oem) flip key, the blade is perpendicular to the handle instead of parallel, which makes it extremely weird when you turn to ignite the engine.

[xsite85]

just made payment on that item pesad42... this switchblade better be worth it

[johnnyofhk]

just made payment on that item pesad42... this switchblade better be worth it

so did you cut the immobilize chip from the old key to the switchblade key?

[pesad42]

so did you cut the immobilize chip from the old key to the switchblade key?

no i got the new key (chip) to work with the car u can add up to 3 keys after that the 1 key will be erased

important links

how to remove the chip
http://tsx.acurazine.com/forums/showthread.php?t=35916

how to program the key (key less entry) does not include the immobiliser progaming

Transmitter Programming

Storing transmitter codes:
The codes of up to three transmitters can be stored into the keyless receiver unit memory. (If a fourth code is stored, the code which was input first will be erased.)

NOTE: It is important to maintain the time limits between the steps. Make sure the doors, the hood and the tailgate are closed.

1. Turn the ignition switch to ON (II).
2. Within 1 to 4 sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver in the power window master switch. (located by the driver’s window switches)
3. Within 1 to 4 sec, turn the ignition switch OFF.
4. Within 1 to 4 sec, turn the ignition switch ON (II).
5. Within 1 to 4 sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver in the power window master switch. (located by the driver’s window switches)
6. Within 1 to 4 sec, turn the ignition switch OFF.
7. Within 1 to 4 sec, turn the ignition switch ON (II).
8. Within 1 to 4 sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver in the power window master switch. (located by the driver’s window switches)
9. Within 1 to 4 sec, turn the ignition switch OFF.
10. Within 1 to 4 sec, turn the ignition switch ON (II).
11. Within 1 to 4 sec, press the transmitter lock or unlock button with the transmitter aimed at the keyless receiver in the power window master switch. (located by the driver’s window switches)
12. Confirm you can hear the sound of the door lock actuators within 1 to 4 sec, then push transmitter lock or unlock button again, or the code will not be stored.
13. Within 10 sec, aim the transmitters (up to two additional ones) whose codes you want to store in the keyless receiver, and press the transmitter lock or unlock buttons.
Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
14. Turn the ignition switch off, and remove the key.
15. Confirm proper operation with the transmitters.

[pesad42]

just made payment on that item pesad42... this switchblade better be worth it

good choice i had a mazda 3 before this it is really easy to carry this key in ur pocket and also better looking with the added advantage of the panic button

Also i changed my 4300k hid to 6000k hids it look great and also converted the H11 fog lams to 6000k hid i will post some pics tomorrow

sherran

[xsite85]

good choice i had a mazda 3 before this it is really easy to carry this key in ur pocket and also better looking with the added advantage of the panic button

Also i changed my 4300k hid to 6000k hids it look great and also converted the H11 fog lams to 6000k hid i will post some pics tomorrow

sherran

since you have the key, is there any flaws, things you have noticed which you might find different from standard honda keys? (eg. sometimes the car doesn't unlock etc...)

[pesad42]

since you have the key, is there any flaws, things you have noticed which you might find different from standard honda keys? (eg. sometimes the car doesn't unlock etc...)

nothing this is the genuine Honda key no difference not a single error and this key is much more quality than the original Australian key

[xsite85]

nothing this is the genuine Honda key no difference not a single error and this key is much more quality than the original Australian key

i can image.. can't wait to get it..

you know the DIY you posted up... is that what we have to do as well, when we get our keys cut, or thats what we are suppose to do? :o

[davey]

will this work with my 04 euro!!!! if so i am going to get one

[racerwannabe]

Pesad42 do you have a CU2 or CL9 euro?

[xsite85]

Pesad42 do you have a CU2 or CL9 euro?

he has a CL9 by the picture of aftermarket key:D

[racerwannabe]

i think they are sold out

[felixd]

the mod looks good but for 150 buks i rather spend the money on other parts :)

[racerwannabe]

you can get the key cut for $20! thats how much i paid. i dont know why you guys have been charged so much!

[xsite85]

you can get the key cut for $20! thats how much i paid. i dont know why you guys have been charged so much!

where are you from dude? :D

[racerwannabe]

Sydney south..the lock smith is on Bay Street Brighton towards the rockdale end. he does programming as well. if you get it done through him it will probably cost no more than $50 (cutting and programming). it took him 15 minutes to cut the key so no need to wait a day or a week like some others have experienced.

[johnnyofhk]

Sydney south..the lock smith is on Bay Street Brighton towards the rockdale end. he does programming as well. if you get it done through him it will probably cost no more than $50 (cutting and programming). it took him 15 minutes to cut the key so no need to wait a day or a week like some others have experienced.

but you know we need to program the immobilize chip(does he do that as well?), anyone could do the programming on the remote~

Anyone in sydney wanna buy the key together~? For cheaper Shipping and programming(immobilize chip) PMPM~

[davey]

johnnyofhk
Anyone in sydney wanna buy the key together~? For cheaper Shipping and programming(immobilize chip) PMPM~

im in!!! :thumbsup:

[xsite85]

but you know we need to program the immobilize chip(does he do that as well?), anyone could do the programming on the remote~

Anyone in sydney wanna buy the key together~? For cheaper Shipping and programming(immobilize chip) PMPM~

aaahhh... just purchased mine... and made payment... you can piggy back with me, since we're in sydney:D

[longers]

its not on the website anymore? i searched ebay and could only find ones that were 70+

[johnnyofhk]

its not on the website anymore? i searched ebay and could only find ones that were 70+

coz i bought a key from ACURA OF PEORIA before, they told me they actually have stock, so it should be alright

1. johnnyofhk
2. davey
3.
4.
5.

[johnnyofhk]

aaahhh... just purchased mine... and made payment... you can piggy back with me, since we're in sydney:D

i think you still in the process of clearing payment, they didn't ship it yet, they could send it all together to your place if you don't mind~ :) also i think we could still get some discount to program the key from dealer

[pesad42]

Pesad42 do you have a CU2 or CL9 euro?

cu2 sat nav lux

[pesad42]

you can get the key cut for $20! thats how much i paid. i dont know why you guys have been charged so much!

this is a blade key not the old type did u cut ur key with the code ?

[pesad42]

Sydney south..the lock smith is on Bay Street Brighton towards the rockdale end. he does programming as well. if you get it done through him it will probably cost no more than $50 (cutting and programming). it took him 15 minutes to cut the key so no need to wait a day or a week like some others have experienced.


door lock programming can be done by anybody but for the immobilizer you have to go to a dealer who has the HDS (Honda diagnostic system) it is sort of a obd 2 but with more advance features

[xsite85]

so the CL9 switchblade might not work?

[tony1234]

So how much $$ all up are we talking here from buying the switchblade to getting it cut,programming etc.Do all the features work such as remote boot release,remote door lock/unlock and so on on/

[tarik]

I'm getting a bit confused now. Just to be clear, can you please confirm:
1. Does this work with CL9?
2. Does the remote door opening & closing still work on CL9?
3. Does the remote boot opening still work on CL9?
4. Does the immobiliser still work on CL9?
5. Does the panic button on the new switch-blade key work on CL9?
6. Does it matter if you buy mem1 or mem2 version of the key (as long as FCC and IC numbers match with what you said)?

Can you also please confirm the process:
a. You get the switch-blade blank key.
b. You get the key cut at locksmith.
c. You program the remote (yourself or dealer).
d. You program the immobiliser (dealer).
e. You do not need to take the chip etc from your existing key to make this new one work.

[xsite85]

cu2 sat nav lux

All CL9 owners are confused... Aarghh... thanks for making me purchase something that might not work :thumbdwn:

[tony1234]

I'm getting a bit confused now. Just to be clear, can you please confirm:
1. Does this work with CL9?
2. Does the remote door opening & closing still work on CL9?
3. Does the remote boot opening still work on CL9?
4. Does the immobiliser still work on CL9?
5. Does the panic button on the new switch-blade key work on CL9?
6. Does it matter if you buy mem1 or mem2 version of the key (as long as FCC and IC numbers match with what you said)?

Can you also please confirm the process:
a. You get the switch-blade blank key.
b. You get the key cut at locksmith.
c. You program the remote (yourself or dealer).
d. You program the immobiliser (dealer).
e. You do not need to take the chip etc from your existing key to make this new one work.
^^^As above.Can someone please confirm.I have a feeling this wont work for CL9.

[longers]

did you check the FCC & IC ID's? if they match then you shouldn't have a problem....
as for xsite85 you're probably going to have to be our guinea pig :p
what was your FCC and IC ID if you don't mind me asking...i have the 07 Accord vti and i was thinking about getting the key


i just looked around...for those CL9 and CM5 we can't use what pesad42 used...
we need the Acura TL Key. Product Number 35111-SEP-306 if you can find it let me know :D

[pxrnm]

did you check the FCC & IC ID's? if they match then you shouldn't have a problem....
as for xsite85 you're probably going to have to be our guinea pig :p
what was your FCC and IC ID if you don't mind me asking...i have the 07 Accord vti and i was thinking about getting the key

Where can we check the FCC and IC ID? there's nothing at the back of my key. I called the dealer but the person who answered didn't even know what FCC/ic id all about, he was just saying about a range of frequency etc (I didn't note down) which by the way making me even more confused :(

[damienm]

^^^As above.Can someone please confirm.I have a feeling this wont work for CL9.

it works for CL9, johnnyofhk has it for his 08 CL9

[xsite85]

let me briefly explain

FCC/IC ID is located inside your remote on the sticker

Memory 1 & Memory 2 is basically your key memory...
Driver key = memory 1
Spare key = memory 2

Acura key can be programmed to be used with memory 1

[xsite85]

did you check the FCC & IC ID's? if they match then you shouldn't have a problem....
as for xsite85 you're probably going to have to be our guinea pig :p
what was your FCC and IC ID if you don't mind me asking...i have the 07 Accord vti and i was thinking about getting the key


i just looked around...for those CL9 and CM5 we can't use what pesad42 used...
we need the Acura TL Key. Product Number 35111-SEP-306 if you can find it let me know :D

i'll be the guinea pig... and if this so called acura key myth works...
you'll have to pay me for results.. :cool:

[longers]

hahaha we'll see
did you fcc and ic numbers match up?

[xsite85]

hahaha we'll see
did you fcc and ic numbers match up?

still haven't received the item yet..

when i do get it.. i'll program it first.. if it does work... i'll cut the key :thumbsup:

[longers]

are you gonna program it yourself?
cuase if you are..you need the key cut first then you can program it.
open up on your key...and it should be on chip that falls out.
and see if you can match it with:
FCC: MLBHL1K-1T
IC: 2500A-HL1K1T

[xsite85]

bugger i guess i have to spend that $20-$50 on getting the key cut

i'll find out for you tonight.. after i get my mugen grill insided

[johnnyofhk]

I thought pesad42 is using the key at the moment, right? pesad42: please clarify for us~

[pxrnm]

it works for CL9, johnnyofhk has it for his 08 CL9

Well he said he can't use the remote:


did you buy the 07TL key or 09TSX? coz i am using it without remote function~ i hope by installing another alarm system to suit the frequency

PS the au honda remote frequency is 4xxMHz when the acura one is 3XXMHz,

[kimnkk]

I thought pesad42 is using the key at the moment, right? pesad42: please clarify for us~

He is, but he owns a CU2 not a CL9.

[pxrnm]

let me briefly explain

FCC/IC ID is located inside your remote on the sticker

Memory 1 & Memory 2 is basically your key memory...
Driver key = memory 1
Spare key = memory 2

Acura key can be programmed to be used with memory 1

So does that mean you have to open up your key to see the fcc/ic id??

[longers]

yeah its not that hard.
two second job
http://img301.imageshack.us/img301/8484/dsc01516vz9xe0.jpg (http://imageshack.us)

[pxrnm]

yeah its not that hard.
two second job


Thanks I'll check it out...

[longers]

yeah no worries...tell me what it is i wanna know too...to see if its the same as mine

[pesad42]

I thought pesad42 is using the key at the moment, right? pesad42: please clarify for us~

yup but i have a cu2

[johnnyofhk]

my switchblade key is different from pesad42's, mine is TL key, pesad42's is TSX key
they look the same~
Soonest (I mean fastest) way to find out now~ Could pesad42 please post a snap shot of his original key?
Any other CU2 owner could help us as well~


like the following, this image is our accordeuro (CL9) original key's
http://members.iinet.net.au/~johnnytam/cl9/key02.gif

if the frequency and the id is the same as the pic above, it should work on our "CL9" as well~

[xsite85]

since pesad42 haven't replied...

my TSX 07-08 key is posted today or tomorrow from the states

i'll give some feedback for our CL9 owners

anyone know a good place where i can get this key cut... please detailed address in sydney

[johnnyofhk]

since pesad42 haven't replied...

my TSX 07-08 key is posted today or tomorrow from the states

i'll give some feedback for our CL9 owners

anyone know a good place where i can get this key cut... please detailed address in sydney

i got mine cut for $50 bucks, finish within 10mins, near waterloo's honda dealer,
i willing to go together with you~

[pxrnm]

my switchblade key is different from pesad42's, mine is TL key, pesad42's is TSX key
they look the same~
Soonest (I mean fastest) way to find out now~ Could pesad42 please post a snap shot of his original key?
Any other CU2 owner could help us as well~


like the following, this image is our accordeuro (CL9) original key's
http://members.iinet.net.au/~johnnytam/cl9/key02.gif

if the frequency and the id is the same as the pic above, it should work on our "CL9" as well~

My remote look exactly like the above... standard Australian euro I guess... no FCC id/IC

[racerwannabe]

yeah no worries...tell me what it is i wanna know too...to see if its the same as mine

longers whats your FCC and ID no. on your key? Is it the same as the acura tsx (new model) key?

[longers]

FCC: ID OUCG8D-380H-A
IC:850G-G8D380HA

im trying to source an Acura TL key..cuase apprently thats compatible with mine.
if it is..then it should be compatible with CL9.

[racerwannabe]

Thanks longers. However, the TL key may not work coz johnnyofhk has the TL key and the keyless function does not work. Johnny correct me if im wrong.

[johnnyofhk]

Thanks longers. However, the TL key may not work coz johnnyofhk has the TL key and the keyless function does not work. Johnny correct me if im wrong.

yea, that's correct, the immobilize chip is same as our cl9's, however, the frequency is different from our cl9, accordeuro

the pic below is the TL key
http://members.iinet.net.au/~johnnytam/cl9/key01.gif

last time i check, the TSX key is not made by OMRON JAPAN, so i think it may not work on our accord euro, however, someone said it could use on the CU2, so it may work on ours, is there any CU2 owner could post up their key's chip?

[kimnkk]

Here's a pic of the Australian CU2 stock key.

http://img.photobucket.com/albums/v377/kimnkk/63be8144.jpg

It seems that this one has the same FCC ID and IC codes as the TSX (CU2 TSX anyway).

[xsite85]

can we mix the CU2 remote and add our CL9 key to it?

is that possible?

[tarik]

can we mix the CU2 remote and add our CL9 key to it?

is that possible?

I think that's what people normally do - take a switchblade template, take the chip etc out of their AU key and put it in the switchblade template. This works with non-OEM ones, I'm not sure about Honda OEM switchblade.

I was really interested in getting in on this, but I don't want to "break" my existing key to get a switchblade.

Has anyone checked if Honda Japan sells switchblades over there? Would that maybe match the frequencies etc of our AU car?

[xsite85]

I think that's what people normally do - take a switchblade template, take the chip etc out of their AU key and put it in the switchblade template. This works with non-OEM ones, I'm not sure about Honda OEM switchblade.

I was really interested in getting in on this, but I don't want to "break" my existing key to get a switchblade.

Has anyone checked if Honda Japan sells switchblades over there? Would that maybe match the frequencies etc of our AU car?

our replacement keys are $300 a pop...

[longers]

hahaha thats an idea that i went for. except i didn't go for the japan one.
i went for the ebay one. and its shocking :thumbdwn:

[longers]

Here's a pic of the Australian CU2 stock key.



It seems that this one has the same FCC ID and IC codes as the TSX (CU2 TSX anyway).

Thats werid i remember seeing the CU2 key and it looked likt the CM5 and the CL9 key. :confused:

[johnnyofhk]

Thats werid i remember seeing the CU2 key and it looked likt the CM5 and the CL9 key. :confused:

yea man, they looks exactly the same but the chip(post#64 and #72) inside is different,
honda australia doesn't give a shit about the key(same as the v14 nav dvd),
so they didn't import the switchblade, or whatever cost cut

[johnnyofhk]

I think that's what people normally do - take a switchblade template, take the chip etc out of their AU key and put it in the switchblade template. This works with non-OEM ones, I'm not sure about Honda OEM switchblade.

I was really interested in getting in on this, but I don't want to "break" my existing key to get a switchblade.

Has anyone checked if Honda Japan sells switchblades over there? Would that maybe match the frequencies etc of our AU car?

in order to make it work, i have an idea. For example my TL switchblade key, the remote keyless entry doesn't work because of the frequency is different, so maybe I could install an alarm system which using the same frequency(3xxMhz, NOT 4XXMhz) as the TL key, so i could use the buttons on the key. is it possible? :confused:

[xsite85]

in order to make it work, i have an idea. For example my TL switchblade key, the remote keyless entry doesn't work because of the frequency is different, so maybe I could install an alarm system which using the same frequency(3xxMhz, NOT 4XXMhz) as the TL key, so i could use the buttons on the key. is it possible? :confused:

sounds like more than $150+

not worth it dude.. all just for a key.. you'll be putting the standard alarm system to waste...

with $250 you can get window lifts + sunroof installed

[johnnyofhk]

sounds like more than $150+

not worth it dude.. all just for a key.. you'll be putting the standard alarm system to waste...

with $250 you can get window lifts + sunroof installed

But the standard alarm system will not set off although someone crash into your parking euro... I came from oversea, nearly all the car on the street in hk has a vibration sensor alarm, but not here, ppl here just don't care? or maybe safer on the street?

[xsite85]

But the standard alarm system will not set off although someone crash into your parking euro... I came from oversea, nearly all the car on the street in hk has a vibration sensor alarm, but not here, ppl here just don't care? or maybe safer on the street?

I'm from HK as well... public transport FTW!!

alot of cases of hit and run's in australia... it's not like a new alarm system would paralyze the driver from running away...

you might not have been here for long.. but nobody cares if an alarm is set off

rob a house with an alarm system and still get away

[curik]

i have one new and unused. PM me if interested.

[racerwannabe]

For those of you who want to use the 09 Acura TSX switchblade key for the CL9 Euro, it is unlikely that it will work because the frequency of the Acura key is different. I found the frequency of the Acura key by doing a web search of the FCC ID. The frequency is in the 3xx MHz range whereas the frequency of the CL9 key is in the 4xx MHz range. Sorry to break the bad news but i hope this will save you guys from wasting your money on something thats not going to work. It's a shame that it works for the CU2 but not CL9 :(

Cheers.

[kimnkk]

Does anyone know the difference between a 'memory 1' and 'memory 2' key?

http://cgi.ebay.com/ebaymotors/2009-Acura-TSX-Switchblade-Key-Remote-Mem-2-NEW_W0QQcmdZViewItemQQcategoryZ40016QQihZ021QQitem Z310075087918QQtcZphoto

This guy is selling both, but the mem2 one is $10 cheaper. If there's no difference for us here, i might as well save $10. What do you all think?

[xsite85]

memory 1 is for driver key
memory 2 is for spare key

as you normally drive your vehicle, the seat will remember each memory key position

[xsite85]

sorry for the late reply guys

just updating the info for my key

FCC: OUCG8D-439H-A
IC: 850G-G8D439HA

is it possible to use my original key to do the programming?
as in using my honda key to start the car but using the acura key when programming?

[pxrnm]

sorry for the late reply guys

just updating the info for my key

FCC: OUCG8D-439H-A
IC: 850G-G8D439HA

is it possible to use my original key to do the programming?
as in using my honda key to start the car but using the acura key when programming?

Finally I've been waiting for this!!!! so how about the Freq?? is it in the 433.9Mhz like cl9??

Anyway I copy this step from some website for Acura TL switchblade key, please note I don't know if this works on euro so here goes:

This step will program the lock, unlock, and panic buttons to work with your Element. It has nothing to do with the immobilizer chip! Programming the buttons to work with your Element can easily be done by you. The dealer does NOT have to perform this step for you (unless you feel like wasting your money).

Programming the remote:

Have all remotes for the vehicle on hand.

Make sure all the doors and rear hatch/trunk are closed during programming.

You only need to use one remote to get into program mode but all remotes must be programmed during the same session.

Each step must be completed within 5 seconds.

1. Sit in the car with all doors/trunk tightly closed.

2. Turn the key to the ON position, marked by “II” on the ignition bezel so the dash lights come on, then within 5 seconds press the “Lock” button on the remote for 1 second or so and release the button.

3. Turn the key to the OFF position, marked by “I” on the ignition bezel - dash lights go off.

4. Repeat steps 2 & 3 three more times (A total of 4 times) - each step must be done within 5 seconds of the previous step.

5. Upon the 4th turning of the key to “ON”, press the lock button on one remote, the locks will make a cycling sound (clunk), locks will NOT lock or unlock at this point, they will just make a noise. The system is now in programming mode. Do not turn key off.

6. Within 5 seconds of entering programming mode and within 5 seconds of each other, press the lock button ON EACH remote you are programming, for a second or so and release. This step needs to be completed within 10 seconds. Each time a remote button is pushed, the locks should cycle. Up to 3 remotes can be programmed.

7. Turn ignition completely off and remove the key. Step out of car and close door.

8. Don’t overlook this step! On the new switchblade key, hold down the lock and unlock buttons at the same time for a few seconds. This removes the memory feature.

9. The remotes should be programmed and should work.



So there you have it!!! let us know if it works k!

[xsite85]

doing abit of research on the Acura TL 2007-2008 switchblade key

2008 Accord Key:
FCC ID: KR55WK49308
IC: 267T-5WK49308
5WK49308
Siemens VDO

2007 Acura Key (Memory 1): <--- that's exactly the switchblade i purchased
FCC ID: OUCG8D-439H-A
IC: 850G-G8D439HA
COFETEL: RLV0MG806-302

It looks like these both operate in the 313.85Mhz range. I guess I should check the battery of the Acura remote next. The LED lights up, but it is possible the power is not strong enough to actually produce a strong enough or correct signal.

Siemens User Manual for 2008 Honda Key:
https://fjallfoss.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=764985&native_or_pdf=pdf

Omron Test Results for 2007 Acura Key:
https://fjallfoss.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=663619&native_or_pdf=pdf

[racerwannabe]

As per my earlier post, the CU2 switchblade key from US has a different frequency to the CL9 key. If you have a CL9 like me dont bother!

[pxrnm]

As per my earlier post, the CU2 switchblade key from US has a different frequency to the CL9 key. If you have a CL9 like me dont bother!

Agreed. I didn't know CU2 has the same freq with TL...

tough :(

[johnnyofhk]

sorry for the late reply guys

just updating the info for my key

FCC: OUCG8D-439H-A
IC: 850G-G8D439HA

is it possible to use my original key to do the programming?
as in using my honda key to start the car but using the acura key when programming?

hey mate, this key cannot be programmed to unlock and lock the car because the frequency is different, i thought i mentioned before already.... however you could program its immobilize chip in order for you to use it to start the engine and unlock the car from driver's door...

i think you are using the same key as me, right? 07TL switchblade key which operating in 313.85Mhz
http://members.iinet.net.au/~johnnytam/cl9/key01.gif

however, our key is operating in 433.9Mhz, pic below is our key.... (our cl9 key is not made by Siemens but Omron)
http://members.iinet.net.au/~johnnytam/cl9/key02.gif

[johnnyofhk]

Agreed. I didn't know CU2 has the same freq with TL...

tough :(

however, if we possible change the frequency receiver in cl9~ do we? probably expensive.. :zip:

[xsite85]

********* FOR SALE **********

2007 Acura Key (Memory 1):
FCC ID: OUCG8D-439H-A
IC: 850G-G8D439HA
COFETEL: RLV0MG806-302

$70 + postage pm me

[printon]

Hi! all, I bought 08 tsx key and TL key from ebay for my 07 Euro(CL9), Unfortunately, the remote function of both not working on my CL9, i did lot of research and found only way can make switchblade key work is replacing the master switch or the frequency receiver ( same thing) which is located at the driver side door. using US accord or TSX one, I have orded one ($80)and will get it next week, dont know will succsess or not, i will give my feedback after i try it!

[davey]

let us know how you go printon

[kimnkk]

I just got the CU2 TSX key off Printon (thanks heaps mate :thumbsup:) and can confirm that it works with the CU2 (at least so far). Got the Memory 2 seat one but it doesn't seem to move the seat to position 2 when i unlock it with this key.

I've just programmed the transmitted so far, still have to get it cut and find a place to program the immobiliser.

They key feels great though, solid (unlike the 3rd party eBay one i got for my CL9) and has a decent weight to it. Acura badging looks great too, only if its different, but i wouldn't mind changing the Honda badges to Acura :cool:.

Does anyone know of a good place in East or SE Melb that can cut and/or program an immobiliser for the CU2?

[longers]

did i mention rams locksmith to you?

[kimnkk]

did i mention rams locksmith to you?

Nah but thanks mate, i'll check them out. Can they program the immobiliser as well? Thanks for the rec mate :thumbsup:

[longers]

not sure about the immobiliser bit. but won't hurt to call up and ask.
i've heard they do really good jobs when it comes to cutting keys

Ram Security Locksmith
Telphone: 1300 137 726
Facsimile: +61 (03) 9793 3584
Address: 122 Foster Street,
Dandenong
Victoria 3175.
Australia.

[printon]

enjoy your key, kimnkk:thumbsup:, I will try to make my TL key working on MY CL9, Good on me:thumbsup:

[kimnkk]

I thought the panic button feature didn't work but it turns out that you have to hold it on for a few seconds :cool:. Here's a comparison of the flip and stock key. Sorry about the heatshrink on the stock key, the other key is attached to a billion others at the moment.

http://img.photobucket.com/albums/v377/kimnkk/82e284ff.jpg


not sure about the immobiliser bit. but won't hurt to call up and ask.
i've heard they do really good jobs when it comes to cutting keys

Thanks mate, i'll give them a call tomorrow morning :thumbsup:


enjoy your key, kimnkk:thumbsup:, I will try to make my TL key working on MY CL9, Good on me:thumbsup:

Cheers :thumbsup:. I would love to know if you get the CL9 one working too - probably the first CL9 Honda flip in Australia? :eek:

[longers]

i shot gun second LOL

edit: i dont drive an CL9...first for CM5

[xsite85]

sorry i have the switchblade key for my CL9

haven't had a chance to cut it yet... because of all the replies stating that it won't work

printon, when you program the new receiver, let us know the feedback.. i would also like to get that installed on mine...

cheers

[printon]

Hi!all, I can't wait, but today is Sunday, i will let you guys know after i done this whatever success or disappoint again

[johnnyofhk]

Hi!all, I can't wait, but today is Sunday, i will let you guys know after i done this whatever success or disappoint again

by changing the receiver, it should be fine, coz the key is working fine but remote function
Goodluck!:thumbsup::thumbsup:

[xsite85]

by changing the receiver, it should be fine, coz the key is working fine but remote function
Goodluck!:thumbsup::thumbsup:

thats why.. his changing the receiver to the switchblade key frequency..

i hope this actually worked.. so then we don't have to change our complete alarm system :(

[huhjared]

Did anyone try these????

http://cgi.ebay.com.au/Honda-3-Button-Flip-Key-Conversion-key-shell_W0QQitemZ370080320429QQihZ024QQcategoryZ6763 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Am i missing something out here?? wont this be a cheaper option? i am about to get this done.... its $80 all up for the conversion... but still considering as i had one of these keys and they tend to never flip back in after like a year or so...

[longers]

its crappy quality. very crappy quality. the panels don't sit flush, and all the chrome fades.

[xsite85]

that key looks very dodgy..

[kimnkk]

Well, what can i say? It worked :D :thumbsup:.

Got it cut for $35 from a place Eastern Honda uses and recommends, and the programming was $55.

Works perfect :thumbsup:

Let us know how you go with yours Printon! Good luck with it, harder task for the CL9 :(.

[printon]

Hi! all, kimnkk goes very well, but i got bad news, It didn't working on my EuroCL9, the master switch of us'accord(2005) arrived at last friday, FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB, It should be same thing with this link
http://www.driveaccord.net/forums/showthread.php?t=9353
I removed my original switch,and replace with US one, perfectly fits, all no problem except programming the remotes, again, same issue. but I don't no why?
I will post some pictures later.

[adrianf]

i'm keen to buy one. anyway else want to join to save on shipping? it's only an additional $2US per extra key.
http://cgi.ebay.com/ebaymotors/2009-Acura-TSX-Switchblade-Key-Remote-Mem-1-NEW_W0QQcmdZViewItemQQ_trksidZp1742Q2em153Q2el1262 QQcategoryZ40016QQihZ020QQitemZ300250121008QQtcZph oto

[kimnkk]

I removed my original switch,and replace with US one, perfectly fits, all no problem except programming the remotes, again, same issue. but I don't no why?
I will post some pictures later.

Ahh, that's a bummer :(. Weird, if you're using the immobiliser from your current chip i don't see why that wouldn't be able to start the car. You wouldn't need to program anything apart from the unlocking/locking module, correct? If that is the same frequency it might work.

Keep us updated mate :)

[printon]

some pictures,hope it's helpful
http://photos-b.ak.facebook.com/photos-ak-sf2p/v331/103/57/577548915/n577548915_1295345_9920.jpg

[printon]

http://photos-h.ak.facebook.com/photos-ak-sf2p/v331/103/57/577548915/n577548915_1295343_9290.jpg
http://photos-a.ak.facebook.com/photos-ak-sf2p/v331/103/57/577548915/n577548915_1295344_9604.jpg

[printon]

the frequency receiver ( FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB)
TL key ( FCC: OUCG8D-439H-A IC: 850G-G8D439HA)
Check this link http://www.driveaccord.net/forums/showthread.php?t=9353
I think should be same, but Why didn't working on our CL9http://photos-c.ak.facebook.com/photos-ak-sf2p/v331/103/57/577548915/n577548915_1295346_224.jpg

[kimnkk]

Wow, that's weird! I'm guessing they both use the same frequency as well, as their FCC ID and IC are the same. Then it would seem that there's no difference between the US Accord and our CL9, similar as to how the CU2 Euro is the same as the CU2 TSX.

When you inserted your current immobiliser chip into the US Accord key, what else did you have to program? Only the lock/unlock module, yeah?

[xsite85]

FCC ID: OUCG8D-380H-B <-- i think the 380 part is the frequency (correct me if i'm wrong)

we have to change the receiver to 439 for it to work

is that what you purchased Printon?

[printon]

Yes, i bought 07 TL Key form ebay, FCC: OUCG8D-439H-A IC: 850G-G8D439HA, I know the Fcc not match the the frequency receiver (FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB), but i found some American guys they did a TL key conversion with their Honda accord (03-07)Key,
the Fcc of their original honda key is OUCG8D-380H-A, so that's why I am thinking if i replace our euro frequency receiver with US accord one which is the Fcc is OUCG8D-380H-B, after that, TL key should be working as well, May be i was wrony

[printon]

http://leachsmeatsandsweets.com/beldinor/pics/P1020274.JPG

[huhjared]

http://img177.imageshack.us/img177/6035/28072008152bk5.th.jpg (http://img177.imageshack.us/my.php?image=28072008152bk5.jpg)

is that key shown on the left original??
cause ebay has one that looks just like it... but its just $25 appprently some of you think the quality is shit... but has anyone gotten it and see if its really that bad?

[johnnyofhk]

hey printon, i wonder the receiver you bought is the one receive signal to lock/unlock the car. or should we replace with CU2's receiver instead of US Accord's? coz we are sure 850G-G8D439HA's 07TLkey work with CU2 selling here

[xsite85]

thats a very good idea johnny,

would the CU2 receiver the same size as the CL9 receiver?

i will definitally call honda tomorrow to ask

[kimnkk]

hey printon, i wonder the receiver you bought is the one receive signal to lock/unlock the car. or should we replace with CU2's receiver instead of US Accord's? coz we are sure 850G-G8D439HA's 07TLkey work with CU2 selling here

Hmm i don't know about that TL key working with the CU2, but i know for sure the CU2 TSX key works with the CU2 here.

[printon]

I don't think so the TL key will works with CU2, because of FCC, Only TSX key can works with CU2, also I am not sure will the CU2 receiver fits our CL9, because of receivers form different company.

[johnnyofhk]

I don't think so the TL key will works with CU2, because of FCC, Only TSX key can works with CU2, also I am not sure will the CU2 receiver fits our CL9, because of receivers form different company.

i thought the 07TL key will work with the cu2, sorry about that. let me comfirm it tmr with my friend just got cu2. i don't understand why the US accord receiver doesn't work with the key... does 'US accord' = 07 TL? :(:(

[longers]

is that key shown on the left original??
cause ebay has one that looks just like it... but its just $25 appprently some of you think the quality is shit... but has anyone gotten it and see if its really that bad?

i have it and its crap quality....i used it for like a month or two and the
chromes faded so im back to stock

[printon]

HI, johnnyofhk
I was thinking same thing, because many American Accord(03-07) owner they done this successfully, no any problem!!!, why we can't!!, I guess maybe honda locked our euro computer chip or FCC:confused:

[xsite85]

HI, johnnyofhk
I was thinking same thing, because many American Accord(03-07) owner they done this successfully, no any problem!!!, why we can't!!, I guess maybe honda locked our euro computer chip or FCC:confused:

have anyone tried to order the US accord receiver?

could it be fitted to our CL9's? :eek:

[longers]

would it work on my accord?

[printon]

have anyone tried to order the US accord receiver?

could it be fitted to our CL9's? :eek:


I did, you can check out Previous pages of this thread, so far, i think it not be able to work with our CL9

[xsite85]

I did, you can check out Previous pages of this thread, so far, i think it not be able to work with our CL9

Printon, are you definitively sure you purchased the correct receiver?

TL key ( FCC: OUCG8D-439H-A IC: 850G-G8D439HA)

the frequency receiver ( FCC ID: OUCG8D-380H-B IC: 850G-G8D380HB)

( FCC ID: OUCG8D-439H-A IC: 850G-G8D439HA ) <--- is there such a receiver?

you must have purchased the wrong receiver with feq 380

US acura keys are feq 439 - we need a feq 439 receiver that fits!!!

[1six8]

out curiosity...how many keys can you programme for the cu2?

had mine done today and it works for the acura tsx flip key.

however, noticed that the original key cannot be used to unlock / lock the car anymore.

is this correct? am I missing something or can only 2 keys be programmed for the cu2?

[AusAccord]

sorry to bring back the own thread as don't want to double post.
http://www.ozhonda.com/forum/showthread.php?p=2283634#post2283634

can anyone help or does it make any sense of what i have done?

[I CU2]

Sorry for raising the dead.

But where on earth did you get the switchblae for $30, the seller is selling it for $120 now >.>

[opilot87]

For anyone interested I got the switchblade key working for a CL9, cost me $50 for the key, $65 for programming/coding from honda, and small fee to cut from key cutter. Very happy with it, if anyone is interested I can try dig up the ebay seller I got it from.

Ollie

[I CU2]

if anyone is interested I can try dig up the ebay seller I got it from.

Ollie

Could you pretty please do that for me :).

[MickEuro]

Hey I CU2, great name lolz. I got the whole flip key that worked with my CL9 from this seller on eBay.

http://stores.ebay.com.au/flipkey/Honda-/_i.html?rt=nc&_fsub=1691733018&_sid=130314528&_trksid=p4634.c0.m14.l1581&_pgn=1

Just make sure that you tell him what letter you have on your original key so that he can give you the right immobiliser chip for australia (mine has a v on the key).
You can get the key cut for less than $50 and programmed from honda for $55 i think. Honda did it for me free of charge because they never seen a flip key work before so in exchange they wanted me to give the details of the seller I had bought it from haha. Hope this helps mate

[I CU2]

Hope this helps mate

Thanks for that Mike, what's the quality of the keys like? They seem to be sideways compared to the normal flat Honda Key.

Lucky with the free programming :).

[MickEuro]

The one I have looks like the real thing, quality is ok i guess. The buttons on the remote don't seem to respond sometimes so I have to press it hard but i expected that from a replica remote. Compared to Honda's genuine remote which isn't flip and cost ~$360!

[I CU2]

Just ordered one, doesn't matter if it's TSX Memory 1 or 2 does it?

[1six8]

should not really matter.

the memory things is just for the seat position 1 and 2.

does not work with our cu2 but everything else works...can only programme 3 keys to our cu2s...

[I CU2]

Got the key yesterday, got it cut and programmed today for $35!

I called around different Honda dealerships, they wanted around $80 to program the key but I spoke to one dealerships service manager and he said that it takes like 10 seconds to program a key and he wasn't going to charge me for it as long as I found someone to cut the key! Score!

Different locksmiths offered to cut the key for free as well seeing as they had never cut a Honda key before but they did warn me there was a chance they'd stuff up so I declined there offer. I went over to a specialist locksmith and he practiced cutting the Honda key onto one of his blanks and made sure that the practice blank worked first before he cut my switchblade. He offered to sell me the spare blank he cut for $35 so I just accepted.

[Sambo73]

I am looking to get a flip key. can someone tell me the best place to get one from? I looked at my OEM key last night and it had the FCC ID: MLBHLIK-1T & IC # : 2500A-HLIK1T.
I see Acura key for around $80US but need the key blade replaced.
http://cgi.ebay.com/ebaymotors/ACURA-KEYLESS-ENTRY-REMOTE-KEYFOB-MLBHLIK-1T-FLIP-KEY-1-/310320338913

Can I get the key blade replaced over here or should I just buy a new key from the start???

Thanks

[Sambo73]

I contacted this seller on ebay.
http://stores.ebay.com.au/flipkey?_trksid=p4340.l2563
He has a 3 button flip key for $55 delivered. I just bought one will give an update soon.

[MickEuro]

I bought my keys from the same seller and it was heaps easy to program the remote with the instructions provided. Just need to get the key milled and the immobiliser programmed by honda. Looks and feels like the real thing :D

http://farm7.static.flickr.com/6147/5931841041_802f2ba123.jpg

http://farm7.static.flickr.com/6149/5932395030_fdb49f9a2d.jpg

http://farm7.static.flickr.com/6004/5932394162_dc6a11bec2.jpg

[Sambo73]

I bought my keys from the same seller and it was heaps easy to program the remote with the instructions provided. Just need to get the key milled and the immobiliser programmed by honda. Looks and feels like the real thing :D

http://farm7.static.flickr.com/6147/5931841041_802f2ba123.jpg

http://farm7.static.flickr.com/6149/5932395030_fdb49f9a2d.jpg

http://farm7.static.flickr.com/6004/5932394162_dc6a11bec2.jpg

I see you got the 4 button version. I asked him for the 3 button version (lock/Unlock/Trunk) He told me that he had a 3 button version for $55 delivered.

Did you get it cut at the Honda dealer? I was going to go to my local Locksmith first and just have my Honda dealer do the immobiliser programmed for me.
Ho long did yours take to be delivered?

[MickEuro]

It took about 10 business days to be delivered. It doesn't really matter which version you get because the red panic button doesn't work for our cars anyway and i got mine for $45...plus getting the key cut for $55 all up cost me $100. I got my key cut at a good locksmith so no risk of stuffing up. If your lucky Honda might program it for you for free!!

[I CU2]

It doesn't really matter which version you get because the red panic button doesn't work for our cars anyway

I just tested my genuine Acura TSX with my Euro and the red panic button works fine. The alarm went off, headlights and indicators flashed etc, wouldn't stop until I pressed unlock. Though, this may be different for the CL9 because it runs on a different frequency to the CU2.

The only thing that the key can't do with our CU2 is the memory seat function which is apparent in the TSX. Sambo, don't buy the used keys. They can't be reprogrammed and I don't even think they made a blank blade for the switchblades.

[Sambo73]

Hi guys just an update on my Flip Key.

I received it Thursday (21/07/2011) from Taiwan which I thought was very quick delivery as I just ordered it a week ago (13/07/2011)

I got it from this seller
http://stores.ebay.com/flipkey/Honda-/_i.html?_fsub=1691733018&_sid=130314528&_trksid=p4634.c0.m322

He did not have the 3 button flip key on his Ebay store page, so I just sent him a message which he confirm that he had 3 button flip key in stock. Make sure you send him your FCC ID number, IC Number and the letter which is located on the blade of the key ( I had L on my key)

I got the key cut for $44 at Millennium locksmith in east Brisbane(beside the Gabba) They had abit of trouble getting the key to fit but after a bit of filling it work like a charm!!

As my Euro was getting its 10000K service the next day I called round to see the service manager of my dealership to if they would code the key for me. At first he said the key would not work in an Australian Euro as they use a different system. I explained to him that other Euro drivers had been able to get their key coded without issue. He finely agreed to try.

Making a long story short it worked just fine!!! best of all he did not charge me :D

All up the key cost $55 delivered and $44 to get it cut so $99 in total.

Here photo of my new Flip Key!!
19360193581935919361

[I CU2]

What dealership?

I might get one for the other car, does it feel weird having the key sideways?

[Sambo73]

What dealership?
I might get one for the other car, does it feel weird having the key sideways?

Austral Honda Newstead. But I called in to Southside Honda too they told me it would be $55.

Not really, did not really think about it!!!

[I CU2]

Where'd you get that leather Honda thing on your keychain??

EDIT: Realised it was Mickeuro's picture.

[Sambo73]

Where'd you get that leather Honda thing on your keychain??

EDIT: Realised it was Mickeuro's picture.
I seen Honda leather Key rings in Ebay
http://shop.ebay.com.au/i.html?rt=nc&LH_PrefLoc=2&_nkw=honda%20leather%20key%20fob&_fln=1&_trksid=p3286.c0.m283

[euRo_noob]

Hey ICU2, you have a switchblade don't you? Is yours sideways like theirs or just like our normal keys? And how much did you get yours for if I may ask? (PM ?)

[I CU2]

Yeah, I have a Genuine TSX switchblade. The blade is flat like our normal keys, all three button works (inc. alarm). I think it was 130ish landed.