eg rail on ek4 seat?

[vinnY]

so the rail on my ek4 seat is busted, the 'outer' one(closer to the door)
afaik eg/dc rails will line up with these holes, only the 'inner' one won't line up with the floorpan

anyone know whether i can bolt up the eg outer rail to my ek4 seat?

specifically talking about the passenger side but presumably it'd be the same for driver side too

[bennjamin]

ive got ek4 seats in my eg.

the OUTER rails are the same its the INNER rail that needs to be swapped
you need to take off the rails , and swap the eg ones onto the ek seats. 100% works fine. you do need a small range of sockets (8mm-17mm) and a phillips head screwdriver , wont take long to figure out.

DO NOT simply swap the inner rail and re use the ek outer , the ek is actually slightly higher and you will sit at a slight angle. much like i do every day lol.

[vinnY]

thanks for that ben
its the outer rails thats stuffed actually.. theres play and it moves up and down
i got spare eg rails and wanted to swap out the stuffed ones for the good working rail :)

will give it a whack and see how it goes

edit; any idea how much taller the ek rail is? might have to find a work around