My cl9 progress :D

[felixd]

Hi guys i just want to share had this car for about 6 months now its accord euro 06 - 07 standard 6 speed manual. Then after awhile got bored and just basically playing around with the engine bay make it looks preety as possible and trying to make the exterior of the car stock as possible on the outside :) have fun
(intake , exhaust , header) + other bits

STOCK LOOKING BAY :)
http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/n608286502_963902_1035.jpg

Mod begin with K&N panel filter inc DIY smoothed out inside airbox lid "no fins" + comptech looks induction + DIY Black Dip stick

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/n608286502_1006629_2057.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/n608286502_963901_246.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/n608286502_964072_2023.jpg

then add oil catch can + mugen oil cap + black engine cover (PHASE 1 done)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/n608286502_964069_9704.jpg

then came the cusco strut brace (PHASE2 started)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/n608286502_999756_5211.jpg

then came the header topspeed S/S (ebay) :P , buddy club prospec from PUMPED (PHASE2 done)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_0931.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_1125.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_095101.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_1138.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P210708_173201.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P210708_172901.jpg



halfway installed look at the stock cat :P so ugly without the heatshield

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_121701.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_1217.jpg


HEADERS DONE

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P030708_122701.jpg



http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P050708_1918.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P130708_1313.jpg



then after awhile the skunk2 radiator cap + skunk2's socks + ingalls ETD arrived (PHASE3 done):)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P290708_114603.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P290708_1148.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P290708_114801.jpg

engine bay is DONE :)
HOPEFULLY MORE MODS TO COME

THANKS TO OZHONDA + FRIENDS

[akina]

is it me or pics not working?

edit:
IF PICS NOT WORK PLS GO TO THX
http://www.facebook.com/photo.php?pid=1089121&l=db092&id=608286502
and thats only one pic i see :(

[felixd]

All fixed & enjoy
sorry not good quality pics

[Crapdaz]

still not working.... kekeke

[Chi]

You cant hotlink facebook pics if people dont have a face book account.

host it some where else.

[felixd]

ALL FIXED :) pls comment

here's the left over pics

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P050708_1919.jpg

Phase 3 DONE :)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/P290708_114602.jpg

[racerwannabe]

nice mods but you need to get new wheels!

[SiReal]

suspension shouldve been first :)

[raz05]

how does the header perform?

[tron07]

The quality of the photos are quite bad... very difficult to see, as its too dark most of the time

[DanVR4]

Coming from a turbo background I'm a bit confused so apologies in advance:
Why is the aftermarket downpipe (from headers to cat) smaller than stock?

[Crapdaz]

sorry mate, do you have pics of your oil catch can?

good to know, your car looks pretty stock even though you've done a few mods.

[BiLL|z0r]

Coming from a turbo background I'm a bit confused so apologies in advance:
Why is the aftermarket downpipe (from headers to cat) smaller than stock?

I'm wondering the same thing, looks heeeeaps smaller.

[akina]

your car looks pretty stock even though you've done a few mods.

hahaha, it may look stock... but hell this wouldn't sound stock!

how do u find the buddyclub catback? do u think its too loud?

now its time to change the looks of the car and a hi flow cat!:p

[Crapdaz]

hahaha, it may look stock... but hell this wouldn't sound stock!

how do u find the buddyclub catback? do u think its too loud?

now its time to change the looks of the car and a hi flow cat!:p

yeh i know after an encounter with your BC exhaust already blew my eardrums off!! kekekee

[_Vtekn_]

Nice!!!

Keep Up the Mods:thumbsup:

[Darkii_]

nice work with the engine bay, i'd recommend some new rims next =) I had those ones and hated them so much =p

[kn1ghtm4r3]

any videos of this thing? =)

new rims are needed for sure ahahah.

[felixd]

thanks guys i appreciate the comment ive got the H&R sport springs at home but im scared to change it then i have to worry about the shocks been shifty after awhile yah the BC exhaust is nice sounded cuz it had an additional resonator + butt plugs :) not that loud as you think :) except when u floor it " it has no ricey sound and very small burble sound "
yah i just want to keep the outside stock for now wheels n handling will be my next mods when i got some time and money :)
SORRY ABOUT THE UNPROFFESIONAL PHOTO :) TAKEN WITH MY LG VIEWTY :(

More pics of the engine bay taken with my n73 its much better than my viewty ???

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008071.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008070.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008073.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008072.jpg

enjoy :)

[STTICH]

crx looks Mint !

any more pics? :)

[akina]

yeh i know after an encounter with your BC exhaust already blew my eardrums off!! kekekee

haha, very very soon ill have toda headers and a hi flow cat. thats when ill really blow ur eardrums off and myself! lol
then i might but my fuji back on.

felix, should get some coilovers! just the springs will not last!
yea the BC exhaust is'nt all that loud when the engine is warmed up, but in the morning... it's pretty crappy lol

[felixd]

pics updated:P

[Suntzu]

Nice, bit like my mod log.

Do the cat and get a high flow one, I have the topspeed header, comptech intake and Jtune mild flash and the hi flow cat make a good difference to torque.

I dunno about the exhaust you have as I havent heard about it before. Expensive??

Keep up the good work and drop that bitch!

[felixd]

how does the header perform?

OEM gives more power from 6 -7k rpm noticeable, topspeed header mid range noticeable
slight small hiss but not noticeable when music on and windows up and the hiss will kick in when you actually floor it :)
cheers

[tony1234]

thanks guys i appreciate the comment ive got the H&R sport springs at home but im scared to change it then i have to worry about the shocks been shifty after awhile yah the BC exhaust is nice sounded cuz it had an additional resonator + butt plugs :) not that loud as you think :) except when u floor it " it has no ricey sound and very small burble sound "
yah i just want to keep the outside stock for now wheels n handling will be my next mods when i got some time and money :)
SORRY ABOUT THE UNPROFFESIONAL PHOTO :) TAKEN WITH MY LG VIEWTY :(

More pics of the engine bay taken with my n73 its much better than my viewty ???

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008071.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008070.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008073.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/29072008072.jpg

enjoy :)
Since you've got a set of decent springs just buy some Koni or Bilstein shocks and you'll be good to go.BTW i've got Eibachs with Bilsteins.Do it you wont regret it.:thumbsup:

[BiLL|z0r]

You and your bloody Bilsteins Tony. You love them more than ya mum.

Excuse the noob question but what is the exact purpose of the spoon sock?

[tron07]

spoon socks? dont really do much..... lol... maybe soak up spills and minor heat insulation....

[tony1234]

You and your bloody Bilsteins Tony. You love them more than ya mum.

Excuse the noob question but what is the exact purpose of the spoon sock?
Haha.drive my car and you'll see why i go on about them.

[felixd]

Since you've got a set of decent springs just buy some Koni or Bilstein shocks and you'll be good to go.BTW i've got Eibachs with Bilsteins.Do it you wont regret it.:thumbsup:

oh orite but where to get the sets of shocks ? they expensive ?

[JunYu]

nice car .. where abouts in melbourne are you from?

Akina: sell me your fuji exhaust already :p

[BiLL|z0r]

Felix: Do you have pics of inside your airbox without the fins?

[Crapdaz]

hey,

i may be thick or blind which ever happened first.

Where did you locate your oil catch can?

Cheers,
Darren

[felixd]

hey,

i may be thick or blind which ever happened first.

Where did you locate your oil catch can?

Cheers,
Darren

i locate the catch can on the battery side i fabricate small hangers / supporter to hold it tight still. its preety simple mods and its working :) ill try to get more pics of it now just bare with me :)

[Crapdaz]

i locate the catch can on the battery side i fabricate small hangers / supporter to hold it tight still. its preety simple mods and its working :) ill try to get more pics of it now just bare with me :)

and which points did you install it on the engine block?
and what size hose is it? 9mm or 15mm?

cheerzz!!! :thumbsup:

[felixd]

nice car .. where abouts in melbourne are you from?

Akina: sell me your fuji exhaust already :p

im at highpoint :)

[felixd]

and which points did you install it on the engine block?
and what size hose is it? 9mm or 15mm?

cheerzz!!! :thumbsup:

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008075.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008074.jpg

there u go the piping i use is 10mm :) but 9 mm will be the best

[felixd]

Felix: Do you have pics of inside your airbox without the fins?

heres the smoothed intake lid its a time consuming but rather than i spend on much money to get the comptech i do this :)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008077.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008078.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008080.jpg

cheers

[davey]

excellent job...

was there a difference in the debaffling? worth doing?

[felixd]

since i have never own a comptech system i dunno if it is the same but i can tell you that its better to have it smoothed cuz the theory is air gets in quicker in a smoothed area and having the fins inside will create turbulance so not good

[akina]

Akina: sell me your fuji exhaust already :p

lol!!!
i actually might be turning around and selling the buddyclub now since im getting headers + cat. but ill see how i go once the headers+cat go in, i dont want it too loud :p

[Crapdaz]

have fun akina, that'll make a big difference i reckon.

Take a sound clip before and after.



http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008075.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/30072008074.jpg

there u go the piping i use is 10mm :) but 9 mm will be the best

just wondering where the other tubes feeds back to? one comes from the manifold block other goes to...

[felixd]

have fun akina, that'll make a big difference i reckon.

Take a sound clip before and after.




just wondering where the other tubes feeds back to? one comes from the manifold block other goes to...

one goes to PCV hose as you'll see it easily then take off your engine ivtec cover you'll c where it routed :)

here piccy :)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/catchcan.jpg

[Crapdaz]

one goes to PCV hose as you'll see it easily then take off your engine ivtec cover you'll c where it routed :)

here piccy :)

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/catchcan.jpg

hey that's a better quality pic.
thanks for that.
and also lastly, was there any problem with the residue/spillage when removing those parts?

Thanks for your help.
Daz

[felixd]

hey that's a better quality pic.
thanks for that.
and also lastly, was there any problem with the residue/spillage when removing those parts?

Thanks for your help.
Daz

nope no residue will come out but you can smell the oil :) no worries have fun

[LXRY]

The quality of the photos are quite bad... very difficult to see, as its too dark most of the time


True, maybe should of considered a camera first, lol.

JK looks good ;)

[tron07]

those taken with his nokia is a lot better and nicer already....

[as001]

sound clip please if possible

[felixd]

sound clip please if possible

http://www.youtube.com/watch?v=SqISDE00onk

1,2nd gear pull

the rest is coming

[felixd]

http://www.youtube.com/watch?v=8R-M9sPCn7U
start up :p

[Crapdaz]

where's the revving?

[felixd]

where's the revving?

oh u guys want the revving :) ill do dat asap :)

[taz_435]

well done love the headers

[tony1234]

where's the revving?
Yeah,need to take a clip while you're revving it.

[mp-]

Nice :thumbsup:

it isnt as loud as i expected it to be.

[aaronng]

http://www.youtube.com/watch?v=SqISDE00onk

1,2nd gear pull

the rest is coming

Was that 1st gear done with full throttle? That seems slow.

[mp-]

i was watching it again and also wondered if 1st was pushed all the way?

[aaronng]

His vids make me want to go out and take my own vids. LOL

[larrrz]

whats the orange light that came on when he shifting from 1-2

[davec]

whats the orange light that came on when he shifting from 1-2

thats the VSA light

[felixd]

nah the 1st not full throttle but nearly full if u know wad i mean i just wanna be safe to the engine the second is full throttle :)

[felixd]

His vids make me want to go out and take my own vids. LOL

you should do it its fun :) then we can share with each other :)

[aaronng]

you should do it its fun :) then we can share with each other :)
I don't have a small camera that I can tape to my dash... :(

[aaronng]

nah the 1st not full throttle but nearly full if u know wad i mean i just wanna be safe to the engine the second is full throttle :)

Ahhh, that explains it...

I am tempted to sell off my SS header to try something new. :(

[Crapdaz]

Ahhh, that explains it...

I am tempted to sell off my SS header to try something new. :(
lol same here might wanna go better than my DCsports, like maximworks or toda but then better = more $$$ :mad:

[aaronng]

lol same here might wanna go better than my DCsports, like maximworks or toda but then better = more $$$ :mad:

Yeah, quite a bit of money unfortunately. Maybe I should go for front A-arms instead.

[tony1234]

Ahhh, that explains it...

I am tempted to sell off my SS header to try something new. :(
Get Comptech header.$760 approx.delivered to your door.:thumbsup:

[enkay]

haha hm, wonder how much difference from maxim to dc sports =P

[Crapdaz]

hehehe prob alot.

from stock, dcheads were excellent and major difference.

[JunYu]

hey since we're on the topic here, I was curious to know is there a big difference between the maxim headers and the toda headers?

[aaronng]

I felt more punch from the Toda (Euro with 17" wheels). But then again, the Maxim headers were on an Euro with 20" rims, so I couldn't really tell the power gain.

[JunYu]

both designs are relatively the same arent they?

[aaronng]

both designs are relatively the same arent they?

They are both 4-2-1, but they have different length of primaries and most probably different diameters. The tuned length of the primaries also plays a big role in exhaust gas collection.

[enkay]

hm well my maxim headers is on 17's so need to test that out aye aaronng =D

[aaronng]

hm well my maxim headers is on 17's so need to test that out aye aaronng =D

*AHEM*organiseanEuromeet*AHEM*

[Crapdaz]

i've posted it on upcoming events for peoples suggestions.

atm still at the same place as last sydenham hungry jacks off on princes highway.
or click my signature.

[JunYu]

so are maxim headers as easily obtainable as toda?

[enkay]

well u can get them from the same place that chris_f got his from they still sell them, cant remember the site but if u do a search youll find it.
but the only thing is that its more expensive (bout 2k i think?)
i was lucky got mine 2nd hand

[JunYu]

^ oh, i think i remember a member selling his for $1000 or so.

But yeah, I'm not sure the difference between the two justifies the $500 difference in price.

[felixd]

http://www.youtube.com/watch?v=4pHOCPYsLu0

enjoy
rev till 3000rpm with silencer on it :P

:) OEM sport lip kit installed :) yay

this came too today rz performance pulley set
http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/IMG_0031.jpg

[Crapdaz]

don't use silencer, not worth it to be quiet. hahaha

[felixd]

neighbours will scream the s**ts as you can hear about 1 last second she came down LOL oh well :P

[aaronng]

Looking forward to your vid when I get home. Can't access youtube from here.

[Crapdaz]

looking forward to your vid when i get home. Can't access youtube from here.
nor can i boo!!!!!
looks similiar to my UR pulleys

did you buy a suitable belt to run the pulley?

[aaronng]

Although, I am not a fan of stationary revving. LOL

[felixd]

nor can i boo!!!!!
looks similiar to my UR pulleys

did you buy a suitable belt to run the pulley?

nah i haven't bought the belt yet yeah . ill get it eventually :)

[JunYu]

hey man!!

call me next time you're free! i'd love to see how the kit turned out :D :D :D

[felixd]

hey man!!

call me next time you're free! i'd love to see how the kit turned out :D :D :D

no worries bro :) loving it

[Crapdaz]

have you cleaned your catch can yet to see how much oil it holds after xxxx amount of driving?

[Pumped]

:) the car sounds very familiar

[Crapdaz]

:) the car sounds very familiar
i am a bit lost.... :o

[akina]

i am a bit lost.... :o

felix brought the parts off pumped :p

[felixd]

yahthe catch can after driving about 1000kms i catch just a tiny bit of oil cus i dunt drive hard :) its better if u baffled it up like mine i use fine steel wool and it will catch the oil passes thru :)

[Crapdaz]

yahthe catch can after driving about 1000kms i catch just a tiny bit of oil cus i dunt drive hard :) its better if u baffled it up like mine i use fine steel wool and it will catch the oil passes thru :)

lol, i just bought a cusco for the bling and got it yesterday from japan, thanks for perfectrun.:thumbsup:

[felixd]

lol, i just bought a cusco for the bling and got it yesterday from japan, thanks for perfectrun.:thumbsup:

hey u reckon u can give us the finish installation of the catch can after ? thx man

[aaronng]

lol, i just bought a cusco for the bling and got it yesterday from japan, thanks for perfectrun.:thumbsup:

I'm going to make my own out of an oil/water trap for air compressors. LOL

[Crapdaz]

I'm going to make my own out of an oil/water trap for air compressors. LOL

haha aaron ghetto DIY king.

show us pics when done.


hey u reckon u can give us the finish installation of the catch can after ? thx man
yeh no worries,
it's basically how you've got it installed (PCV > catch can > manifold) but i prefer to run it shorter than how you have it, just need to find a mounting point suitable.

[felixd]

So its has been awhile i didnt update my car very hard to decide on my mods now so it went like this : ( pics are crappy im sorry)....

-i bought lip kit off the member here :) (OEM sport front lip + rear lip+ front mud flap )+ DIY fog light grill cover

-i DIY blacked the grill H badge + the rear H badge Accord euro writing

-then bought the Ralco (RZperformance) pulley kit + gates belt but decide not to use them so its up for sale !!!!

-look thru on net decide to bolt on (T1R style) fabricate test pipe 2.5" piping just to test it out hopefully when im free i can dyno with my frend :) (car sounds alot louder when start up cold but when idle its normal dead quite no irrating loud noise there) + no CEL Very happy :D

My next will be dyno this car but i dunno when ....... i really cant decide between exterior mods (wheels n handling) / engine mods (mild flash, etc) :( But ill stop for awhile now :)

here is the pics : enjoy
I try to copy this:

http://i112.photobucket.com/albums/n166/chsformal06/d_2031.jpg

result :

http://i112.photobucket.com/albums/n166/chsformal06/20092008124.jpg

http://i112.photobucket.com/albums/n166/chsformal06/20092008123.jpg

http://i112.photobucket.com/albums/n166/chsformal06/20092008121.jpg

http://i112.photobucket.com/albums/n166/chsformal06/20092008126.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/IMG_0095.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/IMG_0098.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/20092008127.jpg

[EUR003act]

i like the blacked out rear badges... looks stealthy :p

my cat convertor has died :(

i had a really annoying rattle at 2000-2500rpm... thought it was the exhaust rubbing.. but no, its the metal fins inside the cat :(

your solution might be an option for me lol even tho it may not be legal :p

[felixd]

:) yeah i thought of getting metal cat b4 but i keep thinking about it LOL will it eventually melt aswell like other ceramic cat LOL ,phew yeah i chosen this setup instead

[aaronng]

I'm not a fan of people who use test pipes on the street. Track and drag is fine, but street, that is just selfish. *cough cough*

[honki3rider]

ooo..Write up on the DIY badge blacking?
I might do that instead of forking out for a mugen/euroR grille.=P

[Pumped]

No cat= crazy
lol

[JunYu]

lol what happened to getting the hiflow cat?

anyway, car looks good

[tony1234]

How does it go with the test pipe as opposed to the OEM cat,did you notice any gain?

[sodaz]

No cat = serious pollution, not to mention that it's highly illegal. The performance difference is negligible for a relatively low output NA car too.

[hooyn]

you crazy man. you crazy.

[EUR003act]

does anyone have their stock headers they wanna sell cheap?

can be in any condition, im just gonna use them for show :D

[felixd]

does anyone have their stock headers they wanna sell cheap?

can be in any condition, im just gonna use them for show :D

me im selling mine :D i got everything u need man

[felixd]

How does it go with the test pipe as opposed to the OEM cat,did you notice any gain?

lost abit of down low torque but high rpm really kicks in better :D

[felixd]

lol what happened to getting the hiflow cat?

anyway, car looks good

i dunt want to get hi flow cat cuz u cant really go fast on melbourne roads so i planned to test this item and see how it goes and now its irritating me cuz i think it sux more petrol + exhaust fumes really stinkssssss HOAHHHHH!!! :(............ ill put my stock cat back next week

Dunt worry about pollution i dont drive my car everyday :D just weekend and im not that crazy as you think i am .this is called a test pipe and only for testing out :P i dunt want to be fined n pollute the world :D

THIS MOD I DONT RECOMMEND PEOPLE TO USE ON THE STREET ON DAILY BASIS !!!

i wanna get ur rims !!!! any 1 want to buy my test pipe :D ?????

[felixd]

I'm not a fan of people who use test pipes on the street. Track and drag is fine, but street, that is just selfish. *cough cough*

well in the track and drag strip also can pollute the world too right ? hmm .....

[aaronng]

well in the track and drag strip also can pollute the world too right ? hmm .....

The number of cars and frequency on the track and drag are much lower than on the street. :) Worse of all is the 10k fine if the EPA finds out.

[JunYu]

Felix .. I'm going to dob you in haha kidding :p

Oh btw, I got a call at like 2:30am last night for the pulley kit, I'll pick it up from you later today. He wants to pick it up monday!

[mykool_itr]

felix you gonna sell it? shotgun test pipe.

now you feel when i drive behind jeremys jdm dc2. have to keep my window up or else i cop the smell of fuel coming out of this exhurst.

[Suntzu]

Why did you decide to ditch the Underdrive pulleys? Are they the cheaper Ralco ones from ebay?

Anything wrong with them or just changed ur mind?

Still selling?

[felixd]

Why did you decide to ditch the Underdrive pulleys? Are they the cheaper Ralco ones from ebay?

Anything wrong with them or just changed ur mind?

Still selling?

i change my mind cuz i wanna go for exterior mods now :( one guy from acurazine has installed his ralco he say the performance is great and noticeable as i said i cant go fast on melbourne roads anyway its SUX !!! arghhhhh yeah i think my pulley kit is sold SEE JUNYU QUOTE :( pick up on Monday sorry

[felixd]

Felix .. I'm going to dob you in haha kidding :p

Oh btw, I got a call at like 2:30am last night for the pulley kit, I'll pick it up from you later today. He wants to pick it up monday!

hey man oh great gimme a buzz :)

[felixd]

long time no updates :( cause of insufficient funds :( trying to stop modding but........ instead????

ok here it goes

test pipe caused trouble ( strong exhaust fumes and throwing CEL and drinkin alot of fuel ) even with defouler ...not good n sold it away! ! !

after a couple of months looking for black vinyl tape (lol) yup its hard to find !!! ive recently found em at bunnings :) ($5 buks) for the 1-2 attemp (took me like 3 hours) its damn annoying trying to get the air bubble out but after the 3rd go (15 min job) its pretty impressive so here is the result trying to copy Euro r window surrounds :) NOW THE CAR LOOKS GREAT with(black and graphites and chrome door handles)

and relocating the oil catch can and add a small air breather dunno wads its for ??? but yeh :)yupp i got bored real quik !!!

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/IMG_0258.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/IMG_0259.jpg

http://i112.photobucket.com/albums/n166/chsformal06/felixs%20cam/IMG_0261.jpg

[CB7_OWNER]

DIY on how you did the black honda badges @ the rear please!

[felixd]

the rear badge and the front grill hmm let me think ....

the paint you need

clean glove, fine steel wool, primer , black spray auto paint, and clear gloss auto paint

remove the badges using hair dry ( heat the glue adhesive )bagde and old atm card carefully remove the badges then to clean the badge scrub with steel wool thoroughly , use clean glove and clean the chrome badge spray the primer 2 - 3 coats let it dry then apply black paint 2 coats for me its all good and leave it dry and apply the clear coat 2 light coats. leave it dry and put it back all together

to glue it back on i use ( sikaflex black stuff ) get ir from autoshop :)