PDA

View Full Version : EK door trim help



Rice_banger
06-08-2008, 04:14 PM
hey was wondering i was needing a replacment door trim for my EK1, the door trim i am speaking of is the one inbetween the 2 panels of glass , it is mounted on the door the black wide strip

i was wondering how do i remove these , i have tryed but snapped the clips

your help is greatly apperciated cheers

J_Phongsavan
06-08-2008, 06:59 PM
unscrew one screw on the pocket, door handle and speaker or unplug the positive or negative from the speaker and take the speaker out with the trim, then after pull and wiggle the trim either shifting it up or down or which ever to get to clips the unclip the trim to the door... thats what i did to my coupe...

Rice_banger
06-08-2008, 07:21 PM
sigh i meant the exteiror door trim

i managed to remove it, need to open up the door and there is 3 screws and then it just slides out

so anyone know how much roughly and where i could get a replacement from ?

phil3842
06-08-2008, 08:44 PM
do you mean the weather strips on the outside part of the window where you put your arm, if that is the part i just ordered them through honda for $160 each

Rice_banger
07-08-2008, 01:54 PM
next to it, the part which attaches to the door

its bolted in via 3 screws

its like a piece of "plastic" which separates the hatch window to door , will get a pic of it

Rice_banger
07-08-2008, 01:58 PM
http://img227.imageshack.us/img227/2191/ekcivicvr4.th.jpg (http://img227.imageshack.us/my.php?image=ekcivicvr4.jpg)

just click on the pic , and i added it in white the part

phil3842
07-08-2008, 06:52 PM
try a wreckers for a replacement