View Full Version : Civic Type R hatch owners
Hey, im just in the process of getting a type r (going to talk figures/deposit tonite) just wondering if any type R owners out there have moded much on the car. Im thinking new rims cuz the stock ones dont really dill my pickle, wat sizes can u fit on it without losing too much handling/ride and still be legal. also has anyone lowered one of these? pros/cons. and wat about intake coolers etc, wont worry bout exhaust obviously but i just wanna know what people have done, any mistakes they made i should avoid etc.
LD_Mart
07-08-2008, 04:25 PM
Well few people have puts 20s on it.
http://i75.photobucket.com/albums/i308/danny_mart/20s.jpg
http://i75.photobucket.com/albums/i308/danny_mart/20s2.jpg
Lowering there is
1. Eibach progressive spring kit
2. KW Variant 1 Coil-over suspension kit (pre-set dampers, adjustable height)
3. KW Variant 2 Coil-over suspension kit (adjustable rebound dampers, adjustable height)
4. KW Variant 3 Coil-over suspension kit (seperately adjustable bump & rebound dampers, adjustable height)
5. ABP -30mm Sports lowering spring kit
6. King Springs
Well so far with induction kits there is some out there but all test have shown that there has been a decrease in power. If you want loud vtec sound then they are good but thats about all they are good for unless your ECU is fully re-tuned.
Why do u say obviously about exhaust there are some out there.
1. Milltek
2. HKS
3. Blueflame Performance exhaust system
and JTUNE has one in progress
Hope this helps you.
bodaas
07-08-2008, 04:37 PM
the red fn not wearing
black rims anymore, hehehe
Zdster
07-08-2008, 04:43 PM
and JTUNE has one in progress
That is seriously funny!
i ment more to the fact that the exhaust kinda already rocks in my oppinion visually, but suppose i wasnt thinking power boost, good call.
probably would skip the intake then, vtec already sounds pretty decent and dont really wanna lose power.
im thinking probably just get some rad 18's, and then get it lowered to suit
has anyone done any visual mods or swapped out lighting/put in a sound system, im thinking sound will be my first go, as its only a 6 speaker but i dont want it to look too outa place, luckily theres plenty o room in teh boot to throw in a subby box if i want.
eg_08_wa
07-08-2008, 07:58 PM
any1 know what suspension setup the red fn is running? :thumbsup:
LD_Mart
07-08-2008, 08:00 PM
king springs it is bodaas's...
LD_Mart
07-08-2008, 08:01 PM
That is seriously funny!
haha progress which will probs never be finished...
LD_Mart
07-08-2008, 08:41 PM
Here are some stereo options for you
Starting with mine :)
http://i75.photobucket.com/albums/i308/danny_mart/mycaR.jpg
A nice clean one
http://i75.photobucket.com/albums/i308/danny_mart/Clean.jpg
Expensive one
http://i75.photobucket.com/albums/i308/danny_mart/Money.jpg
http://i75.photobucket.com/albums/i308/danny_mart/money2.jpg
Some head units
http://i75.photobucket.com/albums/i308/danny_mart/uk2.jpg
http://i75.photobucket.com/albums/i308/danny_mart/uk3.jpg
http://i75.photobucket.com/albums/i308/danny_mart/uk1.jpg
And one in progress
http://i75.photobucket.com/albums/i308/danny_mart/Workinprogress.jpg
UNLS1
07-08-2008, 08:54 PM
Hey, im just in the process of getting a type r (going to talk figures/deposit tonite) just wondering if any type R owners out there have moded much on the car. Im thinking new rims cuz the stock ones dont really dill my pickle, wat sizes can u fit on it without losing too much handling/ride and still be legal. also has anyone lowered one of these? pros/cons. and wat about intake coolers etc, wont worry bout exhaust obviously but i just wanna know what people have done, any mistakes they made i should avoid etc.
dont u get a demo?
have the option, IMO i dont want a demo, i make long trips interstate and just want my own car to do watever i want with and not have to worry about the company. put a deposit on it tonite, great condition, so stoked, just gotta get finance now.
love that last soundstream setup but probably a bit outa my league, the red and black ones were rad, how much did that set u back, and did u add any speakers/tweeters in the cabin seeing as its only 4 speaker?
thanks heaps for the pics! keep em comin on any mods
LD_Mart
07-08-2008, 09:51 PM
the red one is DIY cost me all up about 500 bucks
the black one was done by lifestyle store cost the bloke i think $1200.
I havent changed my speakers as im not real keen on loud music...
just makes u look like a tosser. but thats just my opinion...
i found the speakers were fine for what i wanted they just had no bass...
But heaps of people out there have changed there speakers...
Rad, thanks for the tip, if u could put up any pics/process on ur diy thatd be cool, now that i think about it im not really into loud music either so subby would prob suit me fine but i dont wanna spend 1200 and get more satisfaction out of diy.
LD_Mart
09-08-2008, 11:16 AM
http://www.ozhonda.com/forum/showthread.php?t=90101
i bought all the stuff off ebay..
ahhh oh mighty ebay, wat would we do without u, thanks man, didnt realise u had threaded it already ta
bodaas
09-08-2008, 08:05 PM
And one in progress
http://i75.photobucket.com/albums/i308/danny_mart/Workinprogress.jpg
i have listened to this guy sound system, very sound quality , except the bass not reall loud for me ,,, heheh or could be the music
nax, get that alpine ampli with stock speaker, its more than enough
you can listen how much clearer the sound after you install
has anyone done any LED swaps or light upgrades?
X8TEENX
12-08-2008, 04:07 AM
you can get a CE28N 18X7.5 +43 which will make ur car quicker even in stock and look far nicer. PS. OEM rims 11.XXkg without tyres and CE28N is like 7.XXkg without tyres.....i had one pm if interest :D
Entity_004
12-08-2008, 09:26 AM
Hey X8TEENX that wheel looks sweet.. I was looking at changing the rims on my FN2R.. Wanted to get The Lenso Type-M 19x8.5 but the guy at Bob Jane said that it wont fit on the car.. Does anyone know if this is the case?
meh, i like the style of wheel deffinately, but not a big fan of the colors, im still torn on whether to get silver to make the car less black all over, or go blacks to make the car sorta stealth bomber look, im leaning a bit more towards a black rim at this stage.
have to admit they looked good on the lotus tho
X8TEENX
12-08-2008, 04:05 PM
wat is the offset of the rim entity_004? the original size is 7.5 and i think 8.0 would be good for FN2R.
some pic for the rims on my black dc5r
http://i184.photobucket.com/albums/x101/x8teenx/DSC00092.jpg
was looking around other rims (forged, light weight, and normal) and this type of rims are perfectly fit wat my requirement: nice looking and good for performance.
for FN2R OEM 18 inch rim will definately feel the performance different after changing it.
PS: i had a normal 18 inch rims before and then after i change to this forged wheel, i found pick up is alot quicker. it's highly recommended to get a forged wheel, worth the money.
so basically ur saying dont matter the style as long as i get a lightweight forged racing wheel
love that kit as well, makes the car look hell sexy with those wheels
bodaas
12-08-2008, 04:54 PM
Hey X8TEENX that wheel looks sweet.. I was looking at changing the rims on my FN2R.. Wanted to get The Lenso Type-M 19x8.5 but the guy at Bob Jane said that it wont fit on the car.. Does anyone know if this is the case?
when you go to the wheel shop, just say i need PCD 5X114.3, offset between 40 to 45,
dont listen to what the shop say whether fit or not,
the rims will fit i guarantee, even they say it wont
again, has anyone done light upgrades to xenons or anything similair? if so could u post some pics
and other then getting them imported, is there anywhere in aussie that makes kits/visual mods like blackout light casings etc?
im going for sorta a stealth look with the car
sitta
18-08-2008, 10:56 AM
xenon is easy to do, you can just get the lights of ebay for less than $200, installing it is pretty easy, should only take about 2 hours. You have to drill a hole in the cover for the cable that connect to the ballast and find a place in the engine bay to put the ballast ill post some pics tonight
ya i knew it was an easy conv, i just wanted to see what it looked like with the fn2, have u done anything to ur tail globes??
LD_Mart
18-08-2008, 03:21 PM
ill get u pics tonight :)
sweet thanks guys, look forward to it
denot
19-08-2008, 02:17 PM
hope this helps: http://www.ozhonda.com/forum/showpost.php?p=1836854&postcount=110
omfg nice, i love how with all four done its like a fourway of awsomeness! soooo gonna do that first thing.
have u seen any mods to the tail end of the lighting. brakes, blinkers etc?
Type R Positive
20-08-2008, 03:21 PM
JTUNE exhaust.....
They have one for the Euro in progress for the last 4 years.....
wassup
26-08-2008, 09:47 PM
omfg nice, i love how with all four done its like a fourway of awsomeness! soooo gonna do that first thing.
have u seen any mods to the tail end of the lighting. brakes, blinkers etc?
Check it
http://www.ozhonda.com/forum/showthread.php?t=89362
UGE70Y
27-08-2008, 11:18 PM
when you go to the wheel shop, just say i need PCD 5X114.3, offset between 40 to 45,
dont listen to what the shop say whether fit or not,
the rims will fit i guarantee, even they say it wont
Dude yeah dont listen to the shop dudes they dont know shizzzz
ive got 20x8.5 on mine...
But Eddies (Banong) has more dish .......
Whens the 10inchs goin to come Eddie....
bodaas
30-08-2008, 06:51 PM
Dude yeah dont listen to the shop dudes they dont know shizzzz
ive got 20x8.5 on mine...
But Eddies (Banong) has more dish .......
Whens the 10inchs goin to come Eddie....
we installed new rims already , we tried 9.5 wide for rear and it sticked out by 1 cm which over the plastic vender, and ade didnt want to raise the vehicle back so we have to get the same size wheel again,
it will fit, trust me
if the rear of the car hasnt been lower
Ninjadust77
01-09-2008, 01:15 PM
so ur saying the widest rims u can put on the FN2 are 8.5' - 9'?
bodaas
01-09-2008, 06:53 PM
i believe its hard to get rim 9" wide for just the rear,
unless its custom
usually the shop give you this rims set up
8.5" wide for the front and 9.5" wide for the rear or
8.5" wide for the front and back
if we can get 8.5" front and 9" rear that would be so perfect
and yes 9.5 would definately fit, with the right offset,
but you cant lower the car much, it'll touch the plastic that surround the wheel arc
i said it would fit because someone has put 9.5 wide on fn already
LD_Mart
01-09-2008, 07:58 PM
yeh 9.5 with +43 offset fits on the rear i had it on there with 20s to try it out..
i havent lowered my car though so thats why mine fits....
bodaas
03-09-2008, 09:00 PM
ld show us the pictures, :thumbsup:
LD_Mart
03-09-2008, 09:24 PM
dont have them on...just tested them at jax quickfit to see...still havent bought any rims...
But i am buyin 8.5 for front and 9.5 for rears...most prob
tryme
23-01-2009, 02:32 AM
hey does any1 know where i can get that double din fascia for the fn2? pm please.
spiderman
23-01-2009, 12:03 PM
try www.civinfo.com
go to dealers and ask ANDY ....cost posted ended up being $290 aus i just received mine last week
Webby
tryme
24-01-2009, 09:42 PM
thanks heaps.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.