View Full Version : brake upgrade.
chockz
13-08-2008, 05:22 PM
Hi guys,
need some help with regards to upgrading of front brakes for my EG ..running on GLi brakes (OMGWTH).
want to change to a bigger rotor ...say 262mm (EK4) or DC VtiR (don't know dimensions) and of course the respective calipers.
besides the upgrade of BMC and the pads....i want to know if i can just purchase the individual rotors and calipers...or do i have to get the entire knuckle ( is tat what u guys call it?)
thanks in advance.
chock
vinnY
13-08-2008, 05:24 PM
afaik it should bolt on to the knuckles if you have the discs, calipers and brackets
but isn't the gli sporting rear drum brakes? you'd probably want to have a look at a rear disc conversion too
*corrected by ben* need the knuckles too
chockz
13-08-2008, 05:28 PM
lol ..i knew that will be asked..the rear is settled...
bennjamin
13-08-2008, 05:29 PM
OP , you need new
front knuckles , calipers , discs and pads (L+R) , off a
EG6/DC2/DC4/EK1/EK4
these will result in improved brake performance , but go the next step and get the brake booster+master cylinder off the above cars to use too.
Last get disc rears (trailing arms , handbrake cables , discs , rotors , pads) from teh above cars too. Now you have the braking of the above cars.
vinnY
13-08-2008, 05:31 PM
^ i stand correct, guess you need the knuckles too :)
rpm boy
13-08-2008, 05:34 PM
Chocks, why not a type r upgrage and just redrill to 4 stud?
chockz
13-08-2008, 05:39 PM
wah wah wah...too many options...
i need a brake upgrade for the next circuitclub track day...so finding my options...and finding the best.
so for now ..we have
1) knuckle set + BMC and frens
2) type R (4x114.3 i presume) upgrade from a DC2R.
cool...time to go WTB section.
vinnY
13-08-2008, 06:08 PM
96spec is 4x114.3, which is the same size as ek4/dc2
98spec is 5x114.3, which is 282mm
if you already have the rear disc, your chances of finding 98spec dc2r calipers is actually higher than finding ek4/dc2 caliper
skyfrank85
13-08-2008, 06:37 PM
i got type r caliper on my eg,
and it's 4*100 PCD
all u need is the knuckle from either from EG6/DC2/DC4/EK1/EK4 from pair
type r caliper and rotor for 4*100,
it will fit, but need just little modfy
bennjamin
13-08-2008, 07:07 PM
98spec is 5x115.3, which is 282mm
wrong dude its 5x114.3 :)
chockz
13-08-2008, 10:46 PM
what's with the knuckle thing? can't juz retain my old knuckle, change the rotors (+ the 4x100 socket), change the caliper, BMC and done?
bennjamin
14-08-2008, 07:47 AM
no because your standard knuckle isnt compatible (the mounting for a larger caliper is slightly smaller than required) so you need it as i mentioned as above.
kongfu
14-08-2008, 08:18 AM
no because your standard knuckle isnt compatible (the mounting for a larger caliper is slightly smaller than required) so you need it as i mentioned as above.
hi ben
any tips about jazz brake upgrade?can jazz use 96 JDM dc2 brake set up front and rear?
hey mate,
i have an ITR BB and BMC and looking at the same upgrade for me EG.
IMO best solution is a set of EK1/4 knuckles and some new pads. Just like other people have said :thumbsup:
vinnY
14-08-2008, 09:55 AM
wrong dude its 5x114.3 :)
damnit was a typo :p
chockz
14-08-2008, 12:05 PM
Alright, nuff been said....
thanks to all for their inputs...esp Benn,
time for shopping. Anyone out there have any for sale?
PM thanks
chock
bennjamin
15-08-2008, 08:43 PM
hi ben
any tips about jazz brake upgrade?can jazz use 96 JDM dc2 brake set up front and rear?
totally diffferent front knuckle design - wont fit at all really. for the jazz look at perhaps even dc5 front suspension or knuckles - start a new thread in the jazz section :)
chockz
15-08-2008, 08:45 PM
thanks benn,
don't hijack pls pls pls pls pls...
lol
still trying to find the knuckle set...anyone?
chock
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.