rear low control arm

[connorling]

hi, just wanna know if there is difference between the teg vtir and typeR rear LCA?

also if they will fit EG3(rear drum break) hatch

thanks

[THRILR]

yes they are different..

dc2 (not including type r) lca are the same as EG

[EG5]

hi, just wanna know if there is difference between the teg vtir and typeR rear LCA?

also if they will fit EG3(rear drum break) hatch

thanks

It will fit EG3 rear drum trailing arm

[baeshin]

teg vtir lca is the same as eg si and eg vti lca as well... with the swaybar holes

[Red_EG4]

The teg VTi-R LCA is used for EG/DC style suspension. That is, the way the shock mounts to the LCA is a fork style.
The DC2R LCA is for EG6/DC2R suspension only. DC2R/EG6 style suspension has an eye joint at the bottom and this goes inside the LCA.

For what reason are you changing LCA's? to fit a sway bar, new suspension etc etc

[connorling]

The teg VTi-R LCA is used for EG/DC style suspension. That is, the way the shock mounts to the LCA is a fork style.
The DC2R LCA is for EG6/DC2R suspension only. DC2R/EG6 style suspension has an eye joint at the bottom and this goes inside the LCA.

For what reason are you changing LCA's? to fit a sway bar, new suspension etc etc

i got a suspension for DC2R, but the seller states that i need DC2R Rear LCA.
what about the front, will that suspension fits???

[90LAN]

front will fit with no mods
eg/dc2 vtir skinny lcas
dc2r/eg6 ones are fat

[EG]

i got a suspension for DC2R, but the seller states that i need DC2R Rear LCA.
what about the front, will that suspension fits???

If the suspension you have bought is for DC2R/EG6 then yes you will need the DC2R lower control arms also to fit them. Fronts will be fine.

This is what you'll need:

http://i50.photobucket.com/albums/f330/hipowerracing/PARTS/P1010019.jpg?t=1201141219

[EK9]

does this also apply to eg sedans? so dc2r sussy will fit if dc2r rear lcas are used? fronts are the same i assume?

[EG]

does this also apply to eg sedans? so dc2r sussy will fit if dc2r rear lcas are used? fronts are the same i assume?

eg hatch same for sedans also.

[jeffreymui]

isnt it that all the dc are the same? all LCA should fit all dc and eg perfectly since bennjamin told me..haha cas im abt to purchase dc2r upper and lower control arm to fit my dc4 since my one is stuffed up

[EG]

isnt it that all the dc are the same? all LCA should fit all dc and eg perfectly since bennjamin told me..haha cas im abt to purchase dc2r upper and lower control arm to fit my dc4 since my one is stuffed up

dc2-r rear lca's are different to the other dc2's - vtir/gsi model as dc2-r rear lca uses sussy where the end is round joint type that goes inside the lca while vtir/gsi have fork type at the end of the sussy which sits over the lca.

lca from eg and dc will fit each other no problems.

[EG]

Visual comparison

EG lca
http://i19.photobucket.com/albums/b157/floydforlife/egrearlcas.jpg

DC2-r
http://i19.photobucket.com/albums/b157/floydforlife/itrrearlcas.jpg

[jeffreymui]

so the front fits any dc and eg from dc2r?