View Full Version : Rear Bumper bar
beeza
18-08-2008, 11:28 AM
My car was hit from behind,just slightly... but I can get a new bar on insurance so what is the best bar for my 96 EK1 Civic sedan please? I understand the 99-00 facelift/pre-facelift 96-98 for the front end but not the rear.
shadou
18-08-2008, 11:43 AM
pretty sure the rear end stayed the same
Mugen Civic
18-08-2008, 12:22 PM
The pre-face lift and face lifted rear bar are slightly different. For example, the pre-facelift rear bar has thous black plastic strips on the corners.
The fitment i'm not 100% sure, I think it may be slightly different.
shadou
18-08-2008, 12:31 PM
aren't those optional?
beeza
18-08-2008, 04:47 PM
Cheers,I can't decide if it will look better with or without the strips...since my car has them on the front and sides.
beeza
19-08-2008, 04:24 PM
Can anyone give me a positive answer on this plz :)
beeza
21-08-2008, 12:20 PM
bump!
vampzzz
21-08-2008, 01:59 PM
any 96-00 coupe and sedan rear bars will fit, they are interchangeable.
just the hatch rear bars wont fit.
i would personally go for the coupe rear bars or the 99-00 sedan rear bar because they don't have the black strips on them, but it's up to you.
hope this information helps you enough to make your decision.
beeza
21-08-2008, 02:05 PM
Sure does Vampzzz,thanks mate!
Repped!
EK1.6LCIV
21-08-2008, 09:31 PM
Different Bars! Call Honda, I have about the same bar and coupe and sedan are different so two stores have told me
EK1.6LCIV
21-08-2008, 09:32 PM
if its not the case and you want preface look get the EJ8 rear bar
finalazy
21-08-2008, 10:07 PM
if its not the case and you want preface look get the EJ8 rear bar
then an ej8 front to match :)
beeza
22-08-2008, 10:03 AM
Thanks Ryan.So a 96-00 ej8 rear bar? :)
EK1.6LCIV
22-08-2008, 11:54 AM
EJ8s are only from 96-98, bit hard to come by from my expirence, hell any coupe panels are. The cost for wreckers are 220 respectively for each bit, otherwise Honda is around 500 mark for a newy. But the nice people at Southside Honda have assured me that the coupe and sedan are different bars, well to the VINs anyhow, altho I havent checked personally. I wanted to get an EM1 bumper for my lip and thought hell why not a sedan as theyre around everywhere in the wreckers, but I got fed up with no one knowing and ended up retro fitting the EM1 lip to the EJ8 bar, lol
beeza
22-08-2008, 03:43 PM
haha,nice one.Got any pics :)
swannno
22-08-2008, 04:04 PM
hey mate, have a read of this thread - http://www.ozhonda.com/forum/showthread.php?t=94905&highlight=sedan+rear+bar+coupe
Hopefully that will help you
beeza
22-08-2008, 04:09 PM
Thanks Swanno,I remember reading that one :)
EK1.6LCIV
23-08-2008, 06:26 PM
haha,nice one.Got any pics :)
If you find one I have a guy who can actually get it on if youre keen :)
http://i224.photobucket.com/albums/dd127/kwelrap/DSCF1038.jpg
http://i224.photobucket.com/albums/dd127/kwelrap/DSCF1049.jpg
Killa From Manila
23-08-2008, 06:40 PM
get the ek1 99-00 sedan rear bar
and wen u eventually rear end som1 get the ej8 front bar ;)
beeza
24-08-2008, 08:16 PM
That's beautiful Ryan!
That's exactly what I want.Colour match the lip WOOT WOOT :)
Are your side skirts and bump strips colour matched?
Thanls heaps mate.
Your car is lookin' real nice man.
EK1.6LCIV
24-08-2008, 08:23 PM
Yes, the side skirts I bought new for a good deal for the Si model, and we were going to buy the thin side mouldings but ended up finding a great paint that can be applied to that type of plastic without the peeling effect of other paints so we did that.
Thanks mate, just need to finish off a few things needs a timing belt now lol (sigh) lol
We're overdue for a meet up, you coming out to the cruise end of the month?
beeza
24-08-2008, 08:30 PM
Oh yeah,is there a thread for the meet?
Did U paint the stips yourself? nice.
Have you done a timing belt before? It's like anything,once you do it a couple of times with somebody your right.
EK1.6LCIV
24-08-2008, 08:55 PM
Yea, the meet thread is http://www.ozhonda.com/forum/showthread.php?t=95634 come along for some fun
The strips were done in the body shop
Yea, I was goin to have a go doin the timing belt, looks like a fun project for when I have time off, oem parts from the dealer were under 90 so it looks ok. Altho may need to borrow an air wrench from what I've heard
beeza
24-08-2008, 09:26 PM
Yeah,ECU Man's (John) meathod obviously works,a braker bar and some muscle.I used an air gun at my my mechanics to get that darn crank pulley bolt out.
EK1.6LCIV
25-08-2008, 12:13 PM
yea 4sure, it's looking like a fun job :)
beeza
25-08-2008, 03:55 PM
get the ek1 99-00 sedan rear bar
and wen u eventually rear end som1 get the ej8 front bar ;)
Sorry I missed ya post last night :D Is that the same,with no bump strips?
Are ya gonna paint ya boot ryan,it will look heaps better :thumbsup:
gbang007
25-08-2008, 05:22 PM
beeza, i got a front ej8 bar on mine but cant find a rear bar. looks much cleaner imo without strips. but getting a rear is so hard. but i havent been looking that hard either
beeza
25-08-2008, 05:33 PM
Ah thanks gbang,I offered the smash repairer that I can get the bar through ozhonda and he said no,he will get the part himself,so I guess I'll wish him luck :)
gbang007
25-08-2008, 05:44 PM
you found any on here? coz if its convenient, i might grab one.
beeza
25-08-2008, 06:05 PM
I haven't looked as yet.
EK1.6LCIV
25-08-2008, 09:36 PM
there is a company that makes replicas of them, but a genuine one at a wreckers isn't around in QLD, I tried just the other day, the going rate if there is one is $220 second hand in great condition
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.