PDA

View Full Version : Re: cranks shaft bolt B engine


Mooks79
19-08-2008, 01:59 PM
Trying to take a crankshaft bolt off and its so hard cant turn.... Has anyone done this taking it off is it clock wise or anti clock wise???.....What is the best tool to take it off with??What do u guys used to stop the crankshft spinning...
dsp26
19-08-2008, 04:15 PM
dunno if this will help ya:
http://www.ozhonda.com/forum/showpost.php?p=1686743&postcount=15

it is anti-clockwise but the trick i've been advised is to put the car into gear and get someone to step on the brakes before doing the leverage work
dumped echo
19-08-2008, 06:36 PM
Yeah anti-clockwise as a normal bolt. Can do as dsp26 said or get the honda tool, but not sure how much it costs. It's like a hexagon shape that slips into the pulley to hold it still while you slip your socket through it onto the bolt.
Or find high power air gun.
ECU-MAN
20-08-2008, 09:09 AM
http://www.ozhonda.com/forum/showthread.php?t=32257
dsp26
20-08-2008, 08:42 PM
http://www.ozhonda.com/forum/showthread.php?t=32257

nice... video doesn't work though.. would love to see it haha.


hex spanner was like $300ish...
dumped echo
21-08-2008, 01:55 AM
HOLY....$300????
Damn....just buy a very large hex nut and weld on a handle and there you go...same tool for like $15 (obviously i havn't done this but it sounds like a good idea)
dsp26
21-08-2008, 08:46 AM
HOLY....$300????
Damn....just buy a very large hex nut and weld on a handle and there you go...same tool for like $15 (obviously i havn't done this but it sounds like a good idea)

won't be strong enough.. it's THAT tight the first time around.. i think honda put their loctite glue on it
Limbo
21-08-2008, 09:39 AM
take it to a honda mech, its cheaper than $300 that's for sure
Edgeauto
21-08-2008, 11:03 AM
Here is the snap on version of the pulley holderhttp://buy1.snapon.com/catalog/item.asp?search=true&item_ID=53593&PartNo=YA6010A&group_id=12560&supersede=&store=australia&tool=all
dumped echo
21-08-2008, 07:41 PM
Hey...its not a bad price...i'd buy it for $134
fatboyz39
21-08-2008, 07:42 PM
yeah but can just make one if your handy with a welder.
ECU-MAN
22-08-2008, 12:56 PM
nice... video doesn't work though.. would love to see it haha.


...

video link should work, try right click and save