[B]jdm type r shocks[/B]

[rmalov]

hey

do jdm ITR shocks fit on a vtir with the jdm LCAs?, also will an aus spec ITR rear sway bar fit on these shockers? or do you need a jdm sway bar?

any help pleasee??

cheers

[[CRA23]]

yes, and from what i know the jdm shocks are the same as the AUDM ones, but the JDM spring are just a touch harder.

The swaybar doesnt connect to the shocks, it connects to the LCA, and both AUDM and JDM LCAs are the same so its doesnt matter.

[rmalov]

no their not the jdm lcas are much bigger than the aus lcas. could this still be done??
yeh i know the sway bar connects to the lcas but is there any difference in aus one compared to the jap sway bar

[[CRA23]]

ive got a real jdm R and the lca's and exactly the same as the aus ones.

The sway bar diff is the 98spec jdm ones are 1mm thicker in diameter

[rmalov]

hey dude thanks for the info, so an ausspec sway bar will fit on the jdm lcas yer??, and also are the jdm shocks and springs any good? i heard they are very stiff, how low does it sit?

cheers mate

[T-onedc2]

JDM '96 suspension with 22mm rear sway bar = AUDM ITR

JDM '98 springs slightly harder + 23mm rear sway bar + different rear upper arms

All ITR lca's are the same, JDM '98 had wider track due to wider wheels offset.

[VTECMACHINE]

So JDM 98+ rear sway bar is 1mm thicker than AUDM rear sway bars...?

Would a JDM 98+ sway bar fit on to a AUDM ITR?

[[CRA23]]

So JDM 98+ rear sway bar is 1mm thicker than AUDM rear sway bars...?

Would a JDM 98+ sway bar fit on to a AUDM ITR?

Yes and yes, just get the right d-bushes to match, bolts straight in...

[VTECMACHINE]

Thanks champ!

[rmalov]

what about the vtir front sway bar is it the same as the type r front bar??
and will the jap spec lacs and suspension with the sway bar fit on the vtir?

[T-onedc2]

what about the vtir front sway bar is it the same as the type r front bar??
and will the jap spec lacs and suspension with the sway bar fit on the vtir?
JDM '96 & AUDM ITR front sway bar is 24mm = VTi-R
JDM '98 ITR is 25mm front

Yes they will fit but you need LCA + ITR suspension used together, not ITR suspension with VTi-R LCA or vice versa.

EDIT: Oh yeah forgot to mention, in order to fit ITR sway bar to VTi-R you will need either Beaks or ASR subframe reinforcement kit to avoid tearing the subframe.

[Project R]

its important to remember... if your going to put a itr rear sway bar on a vtir... to put a aftermarket rear lower brace... this makes your rear subframe stronger...

the reason is if you put a thicker than standard sway bar on the rear you might tear the subframe when you go up the driveway...

itr already come with a rear lower brace but the vtir didnt...

hope this helps

[rmalov]

thanks for the help. i didnt know about the ASR subframe reinforcement kit, does anyone know were i can get 1 from?? and are they easy to install??

because im goin to be puting this suspension in myself

[T-onedc2]

ASR is available from the traders, JDMYard possibly? And is also easy to fit, comes as a bolt on kit.