HID Lights

[doosra]

Hi Guys,

I'm looking for HID lights for my euro, however am not sure whether i should buy them on ebay or go into a shop to get them. I'm thinking of getting a white/blue colour..

Any thoughts on this.. ?

These are only $74, however proconcept at west ryde said they'll be around $250 from them.

http://cgi.ebay.com.au/hid-kit-xenon-conversion-H1-H3-H4-H7-H11-9004-9006-9007_W0QQitemZ170253121374QQihZ007QQcategoryZ42613 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

There's also this other one which will cost $140

http://cgi.ebay.com/ebaymotors/H1-HID-XENON-KIT-ACURA-RSX-TSX-ALTIMA-01-02-03-04-05-06_W0QQcmdZViewItemQQcategoryZ36476QQihZ020QQitemZ 300250786455QQrdZ1QQsspagenameZWDVW

If these ones aren't suitable, could you guys recommend me a set.. are there any on ebay which are cheap and worth getting.. ?

Also, are they easy to install.. ?

[jamchen]

if i were you,.. i would buy the kit from Ebay and install by myself...

check the ballsts they use... normally you get what you paid...

Personally i would avoid the 74 one...

Perhaps something around 150 to 200 would be ideal.

[xiang]

http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__HID-XENON-CONVERSION-KIT-BULBS-BALLASTS-H1-6000K-NEW_W0QQitemZ300252001575QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item300252001575&_trkparms=39%3A1%7C65%3A1%7C240%3A1318&_trksid=p4506.c0.m245

i've got these, cost me about $150 shipped.
Installed it my self. Work fine, had them for almost a year now.

in regards to the colour, these are of pale blue colour. 8000k has less light output, but is quite blue.

[biee2]

i bought mine from ebay and installed it myself.....paid lik $200 for them i think....its been a while. probably had then on the car for more than 2 years now and no problems. i got a plug and play kit so it was just a matter of taking out the old bulb and putting in the new one and connecting the wires up....didnt have to cut any of my wires

[Darkii_]

do you guys have the standard euro's, how's the light distribution on them? Not blinding people?

[xiang]

yeah ive got the standard model, mine were blinding people, but it's easy to adjust.

[Darkii_]

true =) might head down that path sometime then

[doosra]

http://cgi.ebay.com/ebaymotors/_Car-Truck-Parts-Accessories__HID-XENON-CONVERSION-KIT-BULBS-BALLASTS-H1-6000K-NEW_W0QQitemZ300252001575QQadnZCarQ20Q26Q20TruckQ2 0PartsQ20Q26Q20AccessoriesQQadiZ2865QQcmdZViewItem ?hash=item300252001575&_trkparms=39%3A1%7C65%3A1%7C240%3A1318&_trksid=p4506.c0.m245

i've got these, cost me about $150 shipped.
Installed it my self. Work fine, had them for almost a year now.

in regards to the colour, these are of pale blue colour. 8000k has less light output, but is quite blue.


Thanks, u mentioned urs is 150, however this one is only like $80 or so after exchange rate....

[doosra]

hey guys,

should i be after Bi Xenon or just Xenon

http://cgi.ebay.com/BI-XENON-HID-CONVERSION-KIT-H4-6000K-HI-LO-DUAL-BEAMS_W0QQitemZ350090966274QQihZ022QQcategoryZ9895 QQtcZphotoQQcmdZViewItem

or

http://cgi.ebay.com/HID-XENON-CONVERSION-KIT-BULBS-BALLAST-H7-6000K-NEW_W0QQitemZ290254878579QQihZ019QQcategoryZ9895QQ tcZphotoQQcmdZViewItem

I'm assuming that the HID is just for normal driving at night (lo beam) and 1st one includes Xenon lights for both Lo and High beam ?

There's also differnt types like H3, H4, H7 - too many choices.. i just need to know which one to get .. please help.

[phen_ys]

..Yes, too many choices..i was wondering which xenon light is the best for visibility. 8000k seems to be good but 6000k also seems good..ahh..confuse

[eg_08_wa]

dont mean to hi-jack, but the other day, i noticed that my normal lights, the wiring for that is only single prong, yet the hid kit i got is twin prong.
it seems that it will only suit hi light, cuz thats two prong...

how did you guys get around this problem?

[Type R Positive]

dont mean to hi-jack, but the other day, i noticed that my normal lights, the wiring for that is only single prong, yet the hid kit i got is twin prong.
it seems that it will only suit hi light, cuz thats two prong...

how did you guys get around this problem?
Depends which kit you got. Did you get hi/lo kit?

[eg_08_wa]

no it was just the low.

[xiang]

Thanks, u mentioned urs is 150, however this one is only like $80 or so after exchange rate....

i think shipping was about $50 or something. there's warranty on them too.



There's also differnt types like H3, H4, H7 - too many choices.. i just need to know which one to get .. please help.

you need H1, the euro bulbs are H1.


..Yes, too many choices..i was wondering which xenon light is the best for visibility. 8000k seems to be good but 6000k also seems good..ahh..confuse

factory HID's are i think 4300K, 6000k is prolly as far as you want to go if you still want decent visibility. with 8000k, you cant see as much, cos everything is so blue, and plus you'll attract too much attention from cops. ive got 6000k.


dont mean to hi-jack, but the other day, i noticed that my normal lights, the wiring for that is only single prong, yet the hid kit i got is twin prong.
it seems that it will only suit hi light, cuz thats two prong...

how did you guys get around this problem?

im not too sure what you problem is, but i think maybe you mean there's a second prong that needs to be pluged into the hid kit, the black and the red wires?

if so, i thought there wasnt a second one at first but, i think its the red wire, its connected to the.. bulb housing, you could call it, next to that springy thing that holds the bulb in place.

[biee2]

there are 2 wires....i think you already figured out the first wire, the second wire connects to the light housing....

[pxrnm]

Hi Guys,

sorry to revive the old thread but I can't find any post about this.

I had recently installed a Phillips HID kit 6000k (thanks Aarong for all the advice about the cables and angle) however I realized the light on the left side (passenger) kind of have a tinge of yellow when you stand before the car to check on it.

Is this normal? maybe the angle for that side is to highlight sign post on the left so when you stand at the center before the car it looked a tinge yellow?

I've swapped globes already from the seller with same result and started thinking that this might be normal for all stock that upgrade to HID. Really hate to think if this is caused by the Ballast as it still looked bright to me.

Let me know what you guys think.

Cheers,

[nesterjester]

i installed hids on my standard cu2 a couple of months ago, and never had this "yellow light" problem, even when i stand in front of the car towards the middle.
I have 6000k and they are white with a tinge of blue.
I have a Phillips 6000k HID Kit (H1), and havent had this problem.

All i can think of is that the cl9 and the cu2 have different light bulb position which gives you a different angle. Which is most problem giving you the yellowy look. Plus I find it odd, that the left light is doing this but the right isnt? I would think that try swapping the ballest from the right, with the ballest on the left, and see if thats were your problem is.

[pxrnm]

Yes is only on the passenger side... that is why I thought maybe it's just about the angle issue.

Any non lux CL9 with HID care to share their experience??

[eg_08_wa]

have you check that the bulbs are sitting in correction position? the bulbs can only sit in one way. there's like two "nipples" that have to sit in their spot. if you grab a normal h1 bulb, you will see the two "nipples" im talking about

[pxrnm]

http://i4.photobucket.com/albums/y140/pxrnm/H1.jpg

I think I've put it in correctly with the white bar at the bottom and lock it nicely with the pin. Anyway the bulb slot only allowed you to put in with the white bar at the bottom and no other way.

[N3M3SIS]

I've got the same kit as you, I tried to fit the bulb in and it wont let?
is there any trick to get it in?

[N3M3SIS]

also, where did you mount your ballasts?
as there really isnt too much space in the engine bay?
Any pics would be a GREAT help?!

[N3M3SIS]

BUMP....any help useful?