ek1 rear seats

[adaminc]

Im trying to get my rear seat covers on but cant seem to lift the bottom rears off

is it held down by anything? is there a latch to release it?

thanks =)

[nugget666]

yes there is a latch from memory its at the front of the seat?

[LLS]

Yep, I think theres 3 latch, right, middle and left of the front of the seat :)

[adaminc]

found them... just had to use a bit of force to get them off

covers are on and looking superb...

thanks for the help guyz

much appreciated

[Jord]

one bolt behind lift and pull forward and it pulls out! but glad to see u got it!

[Dc_II]

Digging up an old thread here... and Hi-jacking it too

my EK1 rear seat latch (for the back rest) is broken by the previous owner... So I cant fold it down... the little pulling knob is broken off and there is no way I can get anything down there to grip it and pull it up...

I've tried every way possible to lift the latch up with a screw driver, a pry bar and have even resorted to kicking it in fury and just get a new seat (which I need to do anyways)

Does any one have any idea on how to move the latch up to release the latch so I can frisby the seat to kingdom come?

[travisg]

where in sydney are you,i could help....if not,if your chucking the seat anyway why not cut open the upholstery

[tiksie]

If you have small hands, you can probably pull on the latch lol, would be super hard though.

http://img254.imageshack.us/img254/1796/seatxk1.jpg

[Dc_II]

Travis, Im near Milperra... and you know what? I actually never thought that far about cutting the upholstery.
Have you done it before?

Tiksie, my fat hands have problems opening a can of coke =(

[travisg]

my workshops in dural if you need a hand,i don't come across it that often but i'v had to do it on a few rare occasions.as i said if your chucking the seats anyway that why not

[Dc_II]

got it out...
had to slice the interior...

for future reference guys, cut it about 3-4 cm down from the top... not a 30cm line like I did!!! =P