View Full Version : cold air intake
AZ51LK
02-09-2008, 07:03 PM
Hello,
will the cold air intake and filter from an EJ8 fit into a dc2R?
thanks!!
sorry this was also posted in the integra sub-forum but they dont seem to be smart enough to know the answer...
LiKPiC
02-09-2008, 08:37 PM
if the cold air intake is designed for an EJ/EK/EM, then it probably wont fit into a DC2.
(which is why the manufacturers make separate designs for EK and DC2 series)
but maybe with some mods it could work?
aimre
02-09-2008, 10:34 PM
dont see why not.
nick_sixx
02-09-2008, 10:38 PM
it should fit but you may need a larger adapter for a dc2 throttle body
vinnY
03-09-2008, 12:35 AM
probably not
have to remember, the dc abs modules usually cover the hole which most ek cai's use
ek cai = use the hole under the driver side headlight where the resonator would be
dc cai = bends forward towards the coolant overfill, down then bends into the space where the resonator would go
SPOON EK-KyuU
03-09-2008, 12:57 PM
I just DIY cold air. Went and brought me a K & N and bunnings with some pipe. all done. power up and nice roar.
T-onedc2
03-09-2008, 08:17 PM
Can you show us a pic of the intake you have in mind?
The stock CAI is very different between these cars so I doubt it will.
OMG.JAI xD
03-09-2008, 08:40 PM
short ram should fit on any.
but if it involves pipping each engine manifold has different shape with different bodies.
eg.
eg with k24 wont use a cl9 intake kit. since engine bay is different.
but to asnwer the question. ej8 to dc2.
no.
ej8 is a sohc engine and the pipe is just straight.
dc2 has a bend. as sum have said ^^^
filter probably will fit with a dc2 pipe.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.