PDA

View Full Version : Fujitsubo RM01A on DC5S


RedCod
03-09-2008, 10:03 PM
Seeing as they're quite popular here, does anyone have pictures of a DC5S with the RM01A exhaust?

How is the fitting on our DC5S?

Does the muffler tip poke out?

How is the ground clearance? I've read some posts claiming that the B-pipe of catback systems (Fujitsubo in particular) hangs low. Is this true?

Cheers.

(First post :) )
Chi
03-09-2008, 10:09 PM
http://www.youtube.com/watch?v=5ISnwClByd0

http://www.youtube.com/watch?v=JhRBYMnZDDY

B pipe clearance is generally low on the DC5 regardless of which brand you get.
RedCod
03-09-2008, 10:33 PM
Thanks Chi.

Yes I've seen those videos but was hoping for some photos of the side to show the B-pipe and the tip.

What's 'low'? In the Fujitsubo video that you posted, I can't even see the B-pipe? Can you actually see the B-pipe on stock height? I recall seeing a photo of a black DC5S with an RM01A on the RSX forum and its B-pipe was clearly visible/hanging really low but the car looked like it was stock height.
Riviera_TypeS
03-09-2008, 11:51 PM
im also looking for this catback.

do you reckon this site is trustworthy?
http://tuspeed.com/store5/rm01a-p-252.html

also not sure if it's also compatible for other car models?
jzdhgkd
04-09-2008, 01:03 AM
I'm seeing the RM01A for dc5 for $1107 delivered to sydney from nengun.com (not sure about taxes and all that though), so maybe give that site a look? Couple of people have vouched for its trustworthiness as well I think!
Chi
04-09-2008, 08:46 AM
http://www.ozhonda.com/forum/showthread.php?t=91236
Riviera_TypeS
04-09-2008, 01:49 PM
thanks chi! :thumbsup:
Riviera_TypeS
04-09-2008, 02:17 PM
it appears that they don't have RM01 in stock anymore :(

only powergetter

what's the difference between both?
Tofu
04-09-2008, 03:18 PM
pretty similar to each other.
the RM01 is suppose to have better mid range torque, but I have the powergetter and love it.
Chi
04-09-2008, 05:10 PM
I've heard the Power Getter and RM01A in person with stock headers and the Power Getter sounds much beefier.
RedCod
04-09-2008, 08:11 PM
This is where I'm planning on getting it.

http://www.visionr.com.au/exhaust.htm

I'm in Perth too BTW.
Tofu
04-09-2008, 10:55 PM
Powergetter (http://www.youtube.com/watch?v=kjWoWbn60Rk)

RM01A (http://www.youtube.com/watch?v=5ISnwClByd0)
Riviera_TypeS
05-09-2008, 12:02 AM
This is where I'm planning on getting it.

http://www.visionr.com.au/exhaust.htm

I'm in Perth too BTW.

do they ship to perth? doesn't look convincing though
RedCod
05-09-2008, 08:42 PM
They are based in Perth - O'connor.

For those with an RM01A or the PG, how's the ground clearance when compared to stock?

I don't see why the ground clearance would be any different from stock - isn't it just a bolt-on replacement of the stock.