FN2R gear ratios

[Hullabaloo]

Hi all
does anyone know the exact gear ratios for the FN2R or where I could find them?

Thanks
Matt

[lukits01]

Same as FD2R

http://img.photobucket.com/albums/v504/MJ23FE/Tranny%20Gear%20Calculations/K-SeriesTransmissionTablev3-28-08re.jpg

[Hullabaloo]

ok great thanks. so just checking:
1st gear - 55km/hr
2nd gear - 85km/hr
3rd gear - 120km/hr

?

(all at 8k rpm)

[aaronng]

They will list gear ratios on carsales.com.au. You can get top speed in each gear from the manual or from a Wheels magazine review.

[Ninjadust77]

im pretty sure these details are in the manual...

[Hullabaloo]

Thanks guys, I don't have a FN2R so i couldn't check the manual. From aaron's advice i went to carsales... in case anyone is interested it says:

Ratio 1 - 3.266:1
Ratio 2 - 2.130:1
Ratio 3 - 1.157:1
Ratio 4 - 1.147:1
Ratio 5 - 0.921:1
Ratio 6 - 0.738:1
Final drive ratio - 5.062:1

[Nighthawk]

ok great thanks. so just checking:
1st gear - 55km/hr
2nd gear - 85km/hr
3rd gear - 120km/hr

?

(all at 8k rpm)

If all at redline then 2nd is more like 90-95km/hr.

Which is why 0-100 times are tricky because you need that 3rd gear change to get to 100km/h.

[Stubbsalicious]

85km's at 8k rpm in 2nd? I get to 100k's at around 6.7k rpm in my Vti-L. Must be a bit of difference in the engine.

[aaronng]

85km's at 8k rpm in 2nd? I get to 100k's at around 6.7k rpm in my Vti-L. Must be a bit of difference in the engine.

The gear ratios are different for FN2R and FD1 VTi-L

[redmugenjazz]

hey, just a quick question, changing stock gear ratios to 4.7 ish would increase torque, would this hold true if an even lower final drive was installed? ie a 4.5 final drive would have more torque than a 4.7?