Extra low Kings And 17s bad bad ??

[schuebyTeG]

ive got 17inch RSGTs on mediums i think.

You recon they will scrub like hell droped on Extra Low kings ?

any1 have this ?


Does Rolling my guards make em fit ?


thanks yo

[turbo convert]

i wouldn't go for kings, if you dont have them already, as intime will sag and if not scrubbing at the start will scrub eventually:wave:

[VTECMACHINE]

Kings are the worst springs around. Get some coilovers.

[OMG.JAI xD]

grab skunk2's
bumpy ass. makes u fall asleep.
ill post pics of my car when weather is cleard up.
ive got stockies on though lol so its not a problem.
but the car is fkn dropped.

oh and not to mention i have stock shockies on =]
gosta grab the shocks sum otha time.

[migoreng]

my prelude is lowered on king lows...
ride has been good for a month. it's just slightly bumpier than stock. i've got a 2 finger gap all around with stock 16" rims.
should i expect it to be shocking in another 6 months or so?

;)
so when you say sag are you saying it will keep on sagging over the years til your car is 1cm off the ground? of course no one will let it get that bad...but you know what i mean.
you make it sound so bad...while other people say it's good value and stuff like that lol

so basically kings lows drop around 3.5cm...the really low ones drop like 5-6cm i think

[OMG.JAI xD]

grab monroe shocks for lowered springs.
they come with warranty and is decent enough.
cheap too.

[VTECMACHINE]

Kings suck! LOL

[we tec]

ive got kings with 205/40R17's, dont scrub at all, if you have a bigger tyre ie: 215/45
you will scrub.... i tried putting them on the rear and it scrubbed like hell with no-one in the back!!.... as long as you have 205/40's you should be fine, hope this helps........

[tm143]

i've got 18's on atm... but want to go lower,
can i get ultra low kings?????? with factory shockers,
or should i just get my springs compressed.....

[Alpine]

grab monroe shocks for lowered springs.
they come with warranty and is decent enough.
cheap too.

Monroes are crap. I've been thru TWO SETS and both times they leaked WITHIN warranty. Never again.

[DC4Integra98]

grab skunk2's
bumpy ass. makes u fall asleep.
ill post pics of my car when weather is cleard up.
.

Post a pic!

I'm also running 205/40/17 and would love to see how low the skunk2s go.

[TBS33N]

my car is on air suspension and basically sits on the ground on 18's. As long as you roll the rear guards you will be fine. If you want to slam the crap out of it then you will have to cut out the front plastic guards and get a hammer and bend the the metal seem in which is at the top of the guard where the quarter panel and chassis meet. There is also a bolt that is holding a part of the abs system on in the drivers side guard that you will need to take out and hammer in flat as this will rub on your tyre.

[schuebyTeG]

thx for ur input guys..:D
If you done mind when you say kings can you plz mention if they are medium or extra low :) cos there is abit of a difference.

tm143 - im gussing 18inch wont work 2 well on ultra low kings. maybe mediums...

I had only 16inch wheels with my kings extra lows and i got some scapage on dippy corners. For some reason i hope i can fit 17's with low profile typres...


Rolling ur guards.... beating them wider so ur wheels can turn outwards more ? If you get them rolled do you need 2 respray ur guards ? like would it wreck the paint beating them out ? body work = expensive...


thanks again

[rbk_212]

i have King Superlows on 17s and ive never scrubbed. nor have they sagged in over a year. For a quick, cheap lowering without going all hardass with coilovers, kings are fine.

[hoyin3132]

no man, i had king spring with 17" it scrub whenever i turn,
and it scrub alot if the road is not flat, i was looking upgrade to coilovers now,
no kings!!!

[rbk_212]

no man, i had king spring with 17" it scrub whenever i turn,
and it scrub alot if the road is not flat, i was looking upgrade to coilovers now,
no kings!!!

i should point out that you drive a differenct model of integra than he does, im assuming thats your car in your avatar

[OMG.JAI xD]

Post a pic!

I'm also running 205/40/17 and would love to see how low the skunk2s go.

ill post tommorrow .. i havent gotten pics with it showing ride height.
i got pic of my avatar. but that dont seem too low. the land is abit un even.

[chargeR]

i should point out that you drive a differenct model of integra than he does, im assuming thats your car in your avatar

The car in his avatar is a civic.

[hoyin3132]

that civic is my old car,
and now i got a GSI interga

it is my looks like, 17" with super low kings
http://photos-e.ak.facebook.com/photos-ak-snc1/v318/227/23/638682463/n638682463_1771524_429.jpg

[rbk_212]

The car in his avatar is a civic.

haha woops i didnt look properly, ignore that :P

[rbk_212]

that civic is my old car,
and now i got a GSI interga

it is my looks like, 17" with super low kings
http://photos-e.ak.facebook.com/photos-ak-snc1/v318/227/23/638682463/n638682463_1771524_429.jpg

oh so you say yours scrubs alot? why would that be...

what width are the wheels?


btw is that a black roof? looks sick:)

[schuebyTeG]

u said they scrub when u turn..

What about 'bottoming out' the top of the wheel hitting the top of ur gaurds, like during a dippy corner...

thanks

[tm143]

if i put on ultra low kings will i have to roll all the guards????

[OMG.JAI xD]

as ive promisd.

http://www.ozhonda.com/forum/showthread.php?p=1890681#post1890681

shot of integra dc2 with skunk2 lowering springs. 2.5 in the front.
no scrubbing or bottoming out with stockies.
sorry dont wanna post all pics here. so might as well link =]
havent gotten a chance to take side photos at level height.

[hoyin3132]

ye man, is spray black roof,
is just scrub any turn, hit any dippy cornor,
i think my is 41 offset just i think,
will take some pictures for show u tomorrow

[schuebyTeG]

plz do :)

[Lowiez]

just get air bags yo