PDA

View Full Version : wut offset for dc2r



Mr Rzz
08-09-2008, 01:16 PM
i am looking some rim for dc2r
wonder wut size/offet good for dc2r?

5X114.3 +42?

cheers

VTECMACHINE
08-09-2008, 02:12 PM
Depends on the rims etc. But as a general rule I wouldn't go anything less than +38.. MAX +35. I have +40 on mine, and I love them. Wouldn't choose any other.

DLO01
08-09-2008, 07:30 PM
16x7 +45

Depends what your after?

I have 16x7 +50 on my car.

markoJEK1
08-09-2008, 07:34 PM
Whats factory offset on ITR's ?

jdm_kid
08-09-2008, 07:35 PM
15x6 +50

markoJEK1
08-09-2008, 07:37 PM
Fair enough, Im putting on ITR setup on my car and going to be running +33 16x7 , ive noticed alot of honda owners are scared of a good offset for some reason. With that offset on an EK with ITR gear, will sit pretty flush with the guards and some minor modding on the rear ( lipping ). Now I dont know if that would be the same story on actual ITR's depending on their body design, Imo if you have a choice of what offset you want to run, run a lower offset if possible with major work required for fitment.

DLO01
08-09-2008, 09:29 PM
Yeh, Marko, 16x7 +40 is very close to the lip at the rear on DC2 but it fits fine with 205/45 tyres. Now I would not go any more than 16x7 +45. Just a bit more clearance and I have a little more camber adjustability.

chargeR
08-09-2008, 10:59 PM
Anything will fit within reason if you want it to. For a relatively no fuss, flushish fitment I would go 15x7 +30 to +35. Here is an example of the work needed to make a 15x7 +20 with 205/50 fit: LINK (http://forums.clubitr.com.au/showpost.php?p=111670&postcount=32)

teaseR
09-09-2008, 12:14 AM
im running 38+ with 205/45/16 tyres... theyre fine

VTECMACHINE
09-09-2008, 01:15 AM
Aren't stock DC2R offset: 15 x 6 - +42???

DLO01
09-09-2008, 06:30 AM
^^^ No, they are 15x6 +50

VTECMACHINE
09-09-2008, 09:42 AM
^^^ No, they are 15x6 +50

Thanks for clearing that up. WTF, where did I get +42 from? Are JDM ITR rims +42 or something... or did I just pull that number from my ass?

EK9
09-09-2008, 09:46 AM
Nope, JDM ITR rims are also +50...

Yeah depends on what you're after. But anything not too wide (6 - 7.5" wide) and reasonable offset between +45 and +35 should fit dc2r fine. i'm pretty sure the wheels sit almost identical to EK and EGs.

DLO01
09-09-2008, 12:15 PM
Thanks for clearing that up. WTF, where did I get +42 from? Are JDM ITR rims +42 or something... or did I just pull that number from my ass?

Yep, out of your ass. Jdm ITR 16x7 rims are 16x7, Also +50