redrilling rims

[I heart the SSS]

Sup kids,

I know you can redrill 5x100 to 4x100...

but what about 4x114 to 4x100?

possible?

[panda[cRx]]

i wouldn't really recommend it. i can't imagine it would be good for the structural integrity of the rim

[I heart the SSS]

True..

i've seen some other rims redrilled though... and it looks pretty iffy (like 1mil beetween the metal)

But i'm sure they would only do it if it's safe..?

[Limbo]

i've heard of some places doing this professionally, but never looked into it cos i'm sure they'd charge a fortune.

ALso 4x114 & 4x100 is easy as they are the opposite of each other. I've had multistud rims and that is how they are designed from factory, so i don't see why there is much of an issue

[I heart the SSS]

hm,

http://i2.ebayimg.com/03/i/001/0a/bf/a4fc_1.JPG

Because i really like these, and i'll paint them black and polish the lip..

I'll call magman tomorrow

[Limbo]

easiest way to redrill them would be to bolt on some disk brakes to the wheels and use the bolt holes to drill. The 2 grub screw holes are 4x114 and if you get good bolts it should hold the piece in place for you to redrill them. That's how i redrilled my rotors, but you should use a bench drill.

P.S yeah i like the wantanbes also, Initial D style ;)

[panda[cRx]]

lol u can get those in 4x100!

[I heart the SSS]

;1889312']lol u can get those in 4x100!

Find me a set and i'll give you a present of some form.

Already nagging the guy in JDMST / egay listed ones. (slight buckle on one rim)

[panda[cRx]]

what size u after?

[I heart the SSS]

15 16 14 13

that order, dont mind too much on width..

[3iuuop]

where u located?
if in Qld u should go see Dr Wheel at the gold coast or Chris neil at slacks creek, they do it pro, n pretty cheap

[trism]

dude

this therrad is like

nearly 2 months old