DIY sub hole

[tru3_k177]

hey guys...
i am doing a DIY sub for my boot, and i need to make a hole for u subs...
can anyone recommend me on what is the best and most accurate way of doinng the holes that would fit mine?!
thanx guys

[Feverpitched]

You mean the opening for the speaker? Draw the template, drill a hole then jigsaw it out. Easy as pie.

[tru3_k177]

i know...
but i tried that and it doesn't come up as a circle...
any better idea?

[Feverpitched]

Buy a sub box. Fabrication clearly isn't for you.

[JasonGilholme]

it doesn't have to be a perfect circle. as long as the sub sits in the hole flush and you can screw it down correctly.

If you can't jigsaw your way around in a circle and keep it close to a line then i reccommend a prefabbed sub box too.

[tru3_k177]

naaahhh...
i wanna do a custom made...

[teaseR]

draw the size you want... then drill it out with many holes... easiest if you dont have a jigsaw

[JasonGilholme]

80 dollar jigsaw would be easier then drilling holes lol

[teaseR]

DIY = cheap = ghetto

[JasonGilholme]

i know that. i'm no stranger to DIY. my whole car is that.

but DIY also means you should be prepared to spend a bit of money to do a descent job.

DIY = Do It Yourself not Do It Shit

[Feverpitched]

Take your time with the jigsaw and get the perfect cut. Nobody is rushing you.

[ek4-guy]

Also make sure your jigsaw has a scrolling style blade

[Spoon-Accord]

i dont get what he is trying to do..

[JasonGilholme]

cut a circular hole in a piece of wood for use in a sub box