Custom Cams for K20a2

[LiL FiLo]

Been looking around so i thoguht i might try on here, looking for a set of cnc'd custom cams as title states as i dont think i will find these off the shelf.

260 dur @ 0.50
310 adv dur
.550" valve movement (lift)

180-200 max psi cranking comp on non vtec lobe.

feel free to move to WTB thread, just thought more people would have an idea in tech section

[EG5]

Be very carefull on choosing the right duration and lift on your custom cams . No point doing your own R&D while other companies spent alot of money doing it.
There are alot of aftermarket cams like IPS , Crower , Skunk2 , Toda etc that will work with hardcore K series set up.

[LiL FiLo]

thanks yonas!

[delsol9000rpms]

ye i agree with yonas.... hundreds of hours go into research and developement of the brand name cams as yonas mentioned... how long did you take to r&d your cam specs? i think you should stick to off the shelf cams they will be optimal

[BADHBT]

some one is selling a set

*cough*

[EGB18CT]

just go with something like the ips cams, great results on k series, look on k20a.org heaps of info there.

[fatboyz39]

apparently there was a big cam test for k20a engine. BC, blue print, IPS was to name a few that was tested.

[LiL FiLo]

thanks for the info guys... ive had a look at BC but im after more duration @ .50
around 260...

i have done my research and development, and figured out what specs i need.
fatboyz39 - wats the specs on the big cams - website would be appreciated