PDA

View Full Version : Car wont get into gear



BB6ixer
08-10-2008, 02:16 PM
Hey guys, i just started my car up in 1st gear and then it started to shake and stutter, so i pushed it back into neutral.

But now when i clutch in and try to get into any gears, it wont let me.. what happened? did my clutch stuff up?

Lukey
08-10-2008, 02:24 PM
check clutch fluid in the little container near the bigger one.

mine was empty and i had to fill it back up.

or is it only first gear?

BB6ixer
08-10-2008, 02:27 PM
okay car got into gear and is working fine now after i put it in gear when the engine was off, but now everytime i release the clutch it makes a grinding noise... this can't be good can it?

oh and i also checked the clutch fluid its pretty much full..

Lukey
08-10-2008, 02:28 PM
not sure then

synchros still good?

an93l
08-10-2008, 02:44 PM
Your clutch probably worn out

WNARUN
08-10-2008, 02:55 PM
yeah check out your synchros, also check your clutch if u got a kinda of new clutch its probably not aligned right

NSPYRE
08-10-2008, 02:59 PM
ok, i dont see how clutch fluid or the clutch itself is related to this in any way... a worn clutch will just make it harder/fail to engage so he wont be getting far. the poster has a problem getting the shifter into a gear. if u have a leaking clutch master cylinder then ur clutch pedal will go weird and depending on how much fluid u have in there, it might just stick to the floor.

it sounds like a synchromesh problem. try flushing out ur transmission fluid first and see if its that. was it really cold when this happened?

B16bcivic
15-10-2008, 12:25 PM
i forgot what the mechs told me when i got mine fixed, coz i had the same problem too, and it was sumthing to do with the plates. not sure.

Pjamaz
15-10-2008, 10:55 PM
hey guys.. yeh im gona hav to agree with NSPYRE.. i've come across a problem like this afew times at work and yeh it pretty much does come down to the gearbox it self.. yeh as NSPYRE said flush the fluid n try using REDLINE Performance gearbox fluid.. it should help with getting into gears smoother with lesser crunching..

sassy_fit_vtit
16-10-2008, 01:04 AM
Clutch fluid and/or gears, perhaps the teeth of the gears are worn/broken thus crunching when trying to get into gear

woteva82
23-10-2008, 01:04 PM
see if you have any clutch fluid or maybe its just your gear box go ask the mechanics see what they say.

rrc36
24-10-2008, 11:19 AM
My fren has got a similar problem on his BMW 318i few weeks back,
Got his car back to the dealer,
the service guy later on advised, the clutch is the issue there.

felixd
24-10-2008, 11:39 AM
Shceck Uree Shynchrozz Brouuuu n uree clutch Mouybe das ise Fukup