b18c7 piston type? Flat top or hi-top?

hey guys,

i was wondering, what pistons do b18c7 have? Flat top or hi-top/dome top pistons?

Got a few questions here, first i'd like to ask, why do some poeple replace the b18 head with b16 head? I've seen some combination where people uses pr3 head onto their c2/c7 and uses type r or p72 cams/valves/ springs and etc.. Whats the advantage of this? From my understanding, b16 head has 1cc more than the b18 head? Is that true? If so wouldnt that mean you'll lose compression?

Also,

whats the difference between c7 motor and c2 motor? (just motor wise)


thanks

c7 has flat top, not high dome like b16b pistons.
that compression difference would not mean much at all, dont even think it would make any difference.

maybe they think b16a head flows better than c2 head. idk, never seen any flow chart etc.
c7 has longer duration, higher lift cam and dual valve springs.

idk the difference between c2 & c7 shortblock wise.

http://www.ff-squad.com/tech/temp/pistons.htm

ooooooouuu thanks moochi! Fair enough.. I'd like to find out specifically why they choose the b16 head though, flows in what way and etc..

Hmmm

Quote:

---

Originally Posted by mocchi

c7 has flat top, not high dome like b16b pistons.

---

I've driven a dc2r with ctr pistons.

vely, vely g00t

Quote:

---

Originally Posted by jdmEG5

hey guys,



Got a few questions here, first i'd like to ask, why do some poeple replace the b18 head with b16 head? I've seen some combination where people uses pr3 head onto their c2/c7 and uses type r or p72 cams/valves/ springs and etc.. Whats the advantage of this?

Also,
thanks

---

I think the most common answer to this is people put in what they have lying around.

I was under the impression that the B16A head flowed better than many B18 heads which is why they're the common choice for B20's.

C7 > C2. More powerful.

B18C7 has a Ported B16a head

thanks for the replies guys..

@dougie; yeah i know lol but what makes em more powerful though? Lol

@gsi psi : other than that, any difference in the crank, rods and pistons?

+ Bigger Cams, Dual Valve Springs on both intake/exhaust,Mild port on Intake, Single Stage Large Diameter Intake Manifold,
4-2-1 On AUDM headers, 4-1 JDM Headers with 2.5 inch CAT inlet, Larger Throttle body
+11:1 compression pistons, Micropolished and Counter Weighted Crankshaft, Heavy Duty Clutch and Lighter Flywheel,

thats what i wanted to hear! Lol thanks bro!

Quote:

---

Originally Posted by jdmEG5

thats what i wanted to hear! Lol thanks bro!

---

could have googled it.

i did that but only info i found was the spicification, power etc..

And i started this tread bcoz i want to know the details