hey guys my friend has a written off dc5r and i want his brakes for my dc5 base model what do i need to take from his car to do this conversion?
help me out please
Printable View
hey guys my friend has a written off dc5r and i want his brakes for my dc5 base model what do i need to take from his car to do this conversion?
help me out please
Front calipers
Rotors
Pads
Possibly brakes lines I cant remember.
Should bolt straight up.
Brake lines will most likely be the same.Quote:
Originally Posted by Flippit
But everything else is on the money.
thanks for the reply i will get one this =)Quote:
Originally Posted by Flippit
thanks for the backing flippit up i will get on itQuote:
Originally Posted by WATAJK
do you know if the rear of the base and the rear of a type r are the same?
Should i upgrade both the front and rear or all i really need is the front?
Rears are the exactly the same on an AUDM DC5Quote:
Originally Posted by Anthony21893
thanks for the reply i have been waiting for someone to answer that question for me =)
No worries.Quote:
Originally Posted by Anthony21893
For reference,
you can't do the JDM Front swap (brembos) and not do the rear as the car will not align correctly.
If you do the front, you will need to do the rear.
But if you do the easier route of wanting brembos, just use a S2000 Rotor and bobs your uncle.
Na it is an Australian market dc5r so they are not brembo so is it still ok to just swap the front? Cause the think the rear of an Audm dc5r are the Same as the base models onesQuote:
Originally Posted by WATAJK