Printable View
im currently checking out some wiring in my car. long story short, doing a s2000 cluster conversion
there are two wires on a s2000 cluster,
1. highbeam indicator FEED
2. highbeam indicator INPUT
my car only has one wire that says "highbeam light"
the issue: the blue high beam indicator does not flash on the cluster when i turn my high beams on !
what do i need to do with the two wires from s2000 cluster ? cheers
can you locate the headlight high beam wire on the standard loom?
from the stock harness, yes i can, but there is only ONE wire that goes into the cluster. it is simply labelled as "high beam indicator"
on the s2000 cluster, there are TWO inputs, high beam indicator FEED & high beam indicator INPUT
LOL ive tried both wires, individually, and even merged together and the blue high beam light does not show on my cluster.
shit ****
I have no clue what i'm talking about, its just a random guess, so follow my advice at your peril.Quote:
Originally Posted by zco
the high beam indicator may have its own earth so therefore the two wires are a positive and a negative.
one in and one out.
try that, but if your car blows up along with your house, don't come running to me.
actually searched and i'm quite sure i'm correct.
scroll down to post #48
http://www.d-series.org/forums/diy-f...g-bezel-3.html
hey zco this is what i did i've done the s2k cluster into the dc2 dash using eg dash harness i wired the
red/blue from a connector (A10) green s2k plug cluster to ground black on eg harness b connector (B6) pin
and
red/yellow from from A connector (A9) green s2k plug cluster to red/green on eg dash harness (B1)
hope it helps you what car is it for if its ek
red/yellow green s2k plug to red/green (B6 Highbeam) ek harness
red/blue green s2k plug to black (A2 Ground) ek harness
if it doesnt work swap it around cause it might be negative or positive switched
if you get stuck pm me or reply here i got heaps of info as i needed it to do mine into the egg
shiet.. forgot about this thread.. i managed to get everything working ! and yes bludger/bau was correct, you have to ground one of the wires.. same goes with alot of the other wires listed..
the only thing im stuck with now is the temp gauge. not really sure if i wanna fork out money to get the modifry module to get it working lol
strongly recommend anyone who is doign the s2k conversion to check out mark lamond's site !
rep points to both of you guys. cheers
i didnt want to get that module for the temp gauge from the guy in uk but instead i bought defi gauges lol problem solved