17" 225/45/17 offset+45 would these fit a accord??

hey guys,

selling my rims and a mate ask me would my rims fit his car??

there OZ racing Superleggera, super light racing rims

detail:
225/45/17
offset +45
114.3x5 stud pattern

would these fit on a Honda Accord 6th Gen 2000 model??

your help is much appreciated:thumbsup:

I am pretty sure it should be fine.

Stock offset of the CL9 is +50.

And the later models run 215 tyres.

So Im sure it shoudl have some room to fit that spec of wheel in.

*waits for Aarong to correct*

depends on what model his accord is.

if v6, then 5x114.3. stock offset is +55, 15x6.5 so yes, should be ok but chances of scrubbing if slammed. but camber should solve that issue.,

if 4cyl, then no chance as that is 4x114.3

i have 17x7 +53 on same tyre specs with an anti camber kit in the rear. no scrubbing due to the higher offset.

Quote:

---

Originally Posted by SiReal

depends on what model his accord is.

if v6, then 5x114.3. stock offset is +55, 15x6.5 so yes, should be ok but chances of scrubbing if slammed. but camber should solve that issue.,

if 4cyl, then no chance as that is 4x114.3

i have 17x7 +53 on same tyre specs with an anti camber kit in the rear. no scrubbing due to the higher offset.

---

thanks for the advice,

so he'll pretty much get scrubbing? wonder where and how much camber kits are. his car is stock, beside CAI so i doubt it will scrub at all

hes talking about ride height not really mods.. ie is it lowered at all..

Quote:

---

Originally Posted by 4p1ay

hes talking about ride height not really mods.. ie is it lowered at all..

---

nope completely stock suspensions.. umm will DC5R stock suspension fit a 2000 accord v6???

i doubt it... lol

Maybe not without machining them,

I have the 04 Accord V6 with 20x8.5 +45 and they did not fit width way,
Although I did have to have them machine 3mm off at the wheel shop.
As they hanged out nearly 1 inch.
And now they are beautiful.

Hope this helps buddy.