EG/EH Front Bar

Hi all, just wondering...

Is there any difference between the 2 door and the 4 door front bar?

I sold my 4 door Civic, but I still got my front bar. Thinking of getting a hatch EG instead of finding another 4 door.

- Do I need to make any extensive modifications to the front bar in order to put it on the hatch?

- Or I have to find another 4 door EG/EH for the front bar?

Thanks for the info in advance people!

Oh another thing I am not sure of ...

I have got a set of 17x7.5 rims originally also for the 4 door EH, but didnt have the chance to put it on before I sold off the car.

- 7.5inch ... Can it suit the chassis of the EG/EH?

I think 7.5inch is abit the too broad, and may need some knocking on the inner walls right?

Thanks in advance for the info again people!

the front bar isnt the same for hatch and sedan..

the 4 door front bar is slightly wider than the hatch and also is a bit longer. you could try to fit it but it wont be flush. you'll mainly notice it being too wide at the fenders and will stick out from the bonnet a bit. if you wanted it to be 100% neat and flush you would have to use 4 door fenders, bonnet and possibly radiator mount. 7.5" rims will be too wide and will scrub. will also be illegal as they will be wider than the guards. 7" is pretty much in line with the guards.

hey what bout fitting the EG hatch front bar onto the EG sedan? how will that go?

oh damm!! think the rims got to go!! hahahaa

anyone wants to buy a set of 17x7.5 inch rims!!! lol

guess i have to find another 4 door eg for the parts then.

thanks for the info guys!

http://www.ozhonda.com/gallery/data/...imension1b.JPG
http://www.ozhonda.com/gallery/data/...imension2b.JPG

it will, i think :rolleyes:

ok.. so if this is the case... then why is it that many many people say u cannot fit theeg hatch front bar onto the eg sedan?? coz i want to fit a eg hatch front bar to my sedan..

minor modification is needed to fit

Quote from JDM Honda Civic:
"take off ur front fenders, bumper, and corner lights and replace them with 2-door fenders, bumper and corner lights. im pretty sure the bumper mounts are the same, but dont hold me to it "

"the fenders dont fit. they are different sizes from the coupe/hatch to the sedan. all you really need to do is get a 2/3 door bumper and shave the area wher the corners come into the bumper and drill new holes for the screws by the fender. its pretty easy. check out my car in the EG "show off your sedans" page. its black and ive had it converted for over a year. or you can do it the hard way which is to cut the hatch and sedan fender in half and graph them togather and repaint, but that seems like a bitch and ive only seen one guy on her who went through all that."

where is the EG "Show off your sedans page"??? cant seem to find

http://www.jdmcivic.com/forums/showt...8&page=2&pp=15

Quote:

---

Originally Posted by gambate

minor modification is needed to fit

Quote from JDM Honda Civic:
"take off ur front fenders, bumper, and corner lights and replace them with 2-door fenders, bumper and corner lights. im pretty sure the bumper mounts are the same, but dont hold me to it "

"the fenders dont fit. they are different sizes from the coupe/hatch to the sedan. all you really need to do is get a 2/3 door bumper and shave the area wher the corners come into the bumper and drill new holes for the screws by the fender. its pretty easy. check out my car in the EG "show off your sedans" page. its black and ive had it converted for over a year. or you can do it the hard way which is to cut the hatch and sedan fender in half and graph them togather and repaint, but that seems like a bitch and ive only seen one guy on her who went through all that."

---

what is a 2/3 door bumper?? sorry to be asking such a newbie question.. haha