shocks: Rubber thing cracked

When changing my stock springs to lowering springs, one of the rubber things for the shocks dropped off. It was cracked and i think it just ripped off from the rest of the rubber parts to the shocks.

i've been driving for a few months like this now, and the only thing is that it doesn't dampen the feel when you go over a bump real fast. its part of my rear suspension, so when it goes over a hump, (that i didn't see) and it wheels touch the ground again, i can feel and hear a massive crack, feels real nasty. though i got a heads up what will happen when they changed my springs.

just wondering, what are the long term effects of this, and whats the likely cost to repair this.

Which rubber part are you talking about?
Got a pic of where the rubber was sitting.... Will make life alot easier...
But in the end, it's not healthy for the car + shocks, thats for sure...

its the very bottom part

yeah, doesnt really help.. what sort of mountings do they have? fork or the slip in sorta one? a pic will be heaps helpful

but im sure they have that rubber there for a reason and not having it there would be causing abit of damage... have you thought of simply replacing the rubber ?

it looks like a 8cm donut lol? (())

and its suppossed 2 be used so that bumps are like, dampen or w/e so that u don't have such a harsh feel when u go over one really fast.

sounds like the bottom of the shock body that connects to the LCA, ( the bit where the bolt goes through) the bushing inside must have deteriorated and cracked..if its not that. the only other rubber component of the shock i can think of is the bumpstops.

Something like the following pic issit OP?

http://www.apiem.com/cobra/03Shocks/03ShockBottom.JPG

Yeah that is what it is called, bumpstops. LOL, yeah so i'm missing a bumpstop, sitting on my table for a month now..

so what is it?
that bush in the photo or the bump stop?

yeh the bumpstop is very important i advise you go to an auto shop and buy a bumpstop. its ment to stop the suspensions from compressing all the way down

yeah, i need a BUMPSTOP, not the bushing thing

anyway, so when i go over bumps, the springs coils collide together and that sounds nasty

the only problem is, i forgot which rear shock it was zzzz, and i remember it was a bitch to get the rear suspension out as all this shit was in the way, and getting it back on was even harder.

http://lh5.ggpht.com/Tofuman86/SL43k...2/IMG_2831.JPG
thats what the bumpstop looks like, just take it to a suspesion shop and get them to take it off for you because you need the right tools to take suspension off. Also just get two new bumpstop and install them both so atleast you know there both new and in aboth year your going to have to do the other side, bumpstop are not expensive.

wait.

man you are so confused.

a bumpstop will look like something like this

http://www.ground-control-store.com/...umpstop_dp.jpg

it goes on the shock tube itself, and prevents the shock absorber from bottoming out and metal hitting metal

what you are missing is the rubber that wraps around the spring itself to prevent binding