has anyone done a h22a conversion into a ek ...? if so would u be able to help me please as i am about to start doing my first conversion thankyou.
Printable View
has anyone done a h22a conversion into a ek ...? if so would u be able to help me please as i am about to start doing my first conversion thankyou.
Xolent i would say theres alot of information and guys on here who have done this but please for the sake of 100 people after me who are going to say the same thing please use the search function. It will be your friend. If you have specific queries then shoot them through but this is such a large question and its not like someone can just write you up a manual on how to do the whole thing.Quote:
Originally Posted by xolent
how long is a piece of string?
find out what you want to know. the OH conversion gods aren't going to help you unless you ask them ur specific problems.
and if ur just wanting to know how to do an h22 conversion. research and read through the forum.. i know cause thats what i did
hope this helps
Try searching up honda-tech as well. http://www.honda-tech.com. They have done countless builds and write-ups on the H22A build in to EK's and EG's...Both are relatively the same, cept the EK requires an OBD2 - OBD1 conversion harness for the loom.
Good luck to you matey, I started my search for all the info I needed before asking questions...Come to think of it, no questions have been asked since all the info I found on either here or Honda-Tech.