Printable View
is the jdm sir-g b18c under dash fuse the same as any
other from dc2's?
engine conversion being conducted on a 92 EG GL.
in other words, would i be able to source another underdash
fuse from another more readily available car to fit into the civic?
or is there another solution to this?
Hey, i have found that both the eg civic and dcs share the same fuse box when i was doing my swap
thanks for the quick reply, hopefully when i'm home tonight to
start on the dreaded wiring will reveal this!
here's another question.
would you happen to know if the carb EGs share the same fusebox
as the EFI EGs?
cheers
Im not 100% sure but i think all eg's and dc2's share the same under dash fusebox but pretty sure the under bonnet fuse box is different.Quote:
Originally Posted by MM89
there is a small difference between jap dc2 and AU dc2 fusebox.Quote:
Originally Posted by MM89
some fuses are in different locations.
currently have the Australian DC2 underdash fusebox cover in front of me
accompanied by a Japanese DC2 underdash fusebox cover.
There definitely are some differences..
Yet to find out what they are, unless someone can be kind enough
to point them out for me
pretty please, with a cherry on the top
i dont think your gonna find any differences somehow
i think there's a little bit of difference from what i have gathered so far
like for example there's a fuse on the bottom row in the jdm model
that has 15A and the audm model has 20A. i dont remember quite clearly
which it was for, but there's also some that are blanked in the jdm,
whereas for the audm, it's not.
please correct me if i'm wrong?
all u need to know is, the internal busbar layout & rating is exactly the same on both fuse boxes. Whatever wiring is plugged into the fusebox & protected by fuses from there is up to what accessories exist in the car.
if u cant use the info of the fuseboxes being internally exactly the same to your advantage to fix the problem,then perhaps u should detail the problem u are having & u will get a solution to your problem instead.
MM89, did you buy an SiR-G front cut??