Printable View
hey guys, just need some help here. just got my motor rebuilt with NRP hi - comp pistons. (11.1:1CR) and got it all running, but its not letting me go pass 4000rpm. it starts lagging and mis-firing?. what can be the problem? im running a b18c VTI-R ecu
Limp mode.
Is it throwing a code? Does your CEL light work?
Do you know how to check for errors?
There will be a green plug on the passenger side you need to jump and count the number of flashes while the ignition is on (motor off) that correspond with a certain code.
no codes r thrown
Is it a definate "rev-limit" at 4000rpm? or will it exceed/fluctuate around that area?
were u driving trying to go pass 4000rpm or were siting in neutral and trying to rev pass it?
either in neutral or driving, it wldnt let me go pass
but thanks anyways guys we found the problem..timing jumped a tooth -_-" and its running smooth now :P
thanks for your time
Ok, have you looked into why that happened? I wouldn't want to drive around a motor knowing it's jumped a tooth on me for no apparent reason
Did you install the timing belt wrong? If so, that's different!