Printable View
hay
i have my self an eg4 hatch Breeze
1.5L single Carby :(
but i recently had plug n leads changed
ever since 1 of the leads keeps popping off
not the hole way off the plug but the rubber seal that seals it to the rocket
cover is popping up and slightly pulling the lead off the plug its not dropping the cylinder but is not running the best.
could i be leading compression around the spark plug causing it to lift the lead up enough for it to escape the plug cylinder?
On park plug lead (at the corner) there are little hole for air escape when it expanded by hot temperature. That hole may be blocked and hot air can’t escape so it push the lead popup. Use little needle pin the hole to clear the blockage.
thanx i will try that 2 morro :)
also if it dosent work its also the same plug cylinder that i had problems with
i had a plug snap in it plug shot out and the tread stayed in
i used an easy-out to remove the thread and a magnet to remove any metal shavings from the cylinder risky i no but it worked :)
and if it ****ed my motor it gave me an excuse to do the b series swap lol
but could that have anything to do with it aswell ??
any help the pin didnt work and i discovered oil on the bottom of the lead
and i just replaced the seals between valve cover and the plug cylinders
this god dam d series carby motor is giving me the shits who want 2 donate a injected motor to me :)
cheers 4 help boys :( lol