[YOUTUBE]NzfLwAdeFzY[/YOUTUBE]
i thoguth it was 3 but its 3 long flashes
Printable View
[YOUTUBE]NzfLwAdeFzY[/YOUTUBE]
i thoguth it was 3 but its 3 long flashes
that is code 3. Those are 3 short flashes
*typo*
AWWWWWWWWWWWW lol,
so wat exactly shoudl i do now
look lyk its code 3
code 3 is map sensor not 02 sensor.
Check ECUMAN diy, that would help u
yup MAP sensor (ignore my typo)
check to see the clip is firmly held to the MAP sensor. IF so , replace with a known working MAP to see if that fixes the issue
make sure you havent got the TPS and MAP connectors crossed
http://www.ozhonda.com/forum/showthread.php?t=67230
crossed?
in what way ?
he means they are plugged into the wrong sensor.
mmm are the plugs the same? geez i better check this now
yeh they are both the same, but most likely if they are both mixed up, then u should get 2 codes which is 3 and 7. You only have code 3, the problem most likely be the sensor.
Did u just do a conversion ? or u been driving same motor for a while?
did change motor to the same it had cause the other blew.
and am only gettin error 3
so i should change the map sensor i guess for now
yeh get it changed and remember to reset the ecu after u changed the map sensor