OEM 4.7fd interchangable?

Would the oem 4.7 final drive from dc2r fit b16a\b18c2 box?

With the itr 1st gear , counter shaft and a few other small parts yes ( itr needle bearing lower collar etc)

nice nice info, been looking for this answer

thanks for quick reply, just curious
how much the oem 4.7 fd usually go for second hand

it will fit in the b18c2 as a drop in as will the LSD

Quote:

---

Originally Posted by Mugen_R

Would the oem 4.7 final drive from dc2r fit b16a\b18c2 box?

---

Ok, FD is interchangeble between all B18C/B16B - as ben says for the '98 Spec ITR box.

All EK9/ITR LSD's are the same. The ring gear difference is between the B16A (small diff) and B16B/18C (large diff).
The '98 spec difference is with the countershaft, as the '98 spec uses a slightly different fitment 1st gear.

• B16A
• B16B/B18C/B18C '98 Spec

pretty sure the dc2 b18c2 one has the same gear size cos i used that to drop my LSD over.

The b16 is different that's for sure

Quote:

---

Originally Posted by Limbo

pretty sure the dc2 b18c2 one has the same gear size cos i used that to drop my LSD over.

The b16 is different that's for sure

---

All b18Cs are interchangeable with other B18Cs (including '96 spec type Rs)and B16Bs

i think limbo is refering to b18c2 not b18c 96 spec or 98 spec

So your saying i cant use OEM 4.7fd unless i use the lsd from it as well other parts?

Quote:

---

Originally Posted by Mugen_R

Would the oem 4.7 final drive from dc2r fit b16a\b18c2 box?

---

It will fit the B18C but not the B16A

See post Above

thanks for that mate,