Just about to purchase exedy clutch and fidanza light fly wheel. Are these interchangeable among b16/b18/b20?
ta
Printable View
Just about to purchase exedy clutch and fidanza light fly wheel. Are these interchangeable among b16/b18/b20?
ta
Yes all interchangeable (only the b-series cable type gearbox run a different clutch and flywheel)
they are but the part numbers are different for the pressure plates.
I was told by a dealer it was prob due to the position of the pedal, not 100% sure but i had a friend who used the b18 in a b16 and it was fine
clamp load can be adjusted at clutch workshops mate.Quote:
Originally Posted by Limbo
Goodwork the exedy clutch + fidanza fly is a excellent combo.
just what i needed to hear
thanks guys :thumbsup:
i had massive problems with mine. i bought a fidanza flywheel which caused massive headaches... basically the flywheel you are replacing either has a step or no step
i fitted a SECO (made by Exedy) clutch with Fidanza aluminium flywheel and it would not engage gears... reason being that there was a step on the fidanza flywheel and my oem flywheel didnt... and because the fidanza aluminium flywheel is already so light, there was a danger of machining down the step.
i ended up having to pay for labour again, machining the OEM flywheel and had to sell off the Fidanza flywheel.
oh yea, mine was for a dc2... not sure if its the same for EM1s or not... prolly someone else would be able to confirm this for ya
keep us updated kraiye.
I've got a stepped flywheel(spoon) and an exedy clutch on the wish list, hopefully i wont have the same problem as the poster above.
thanks johnny, very interesting info. sounds like you took one for the team ;)
i believe the b16's and b18's are pretty much interchangeable. a few people have said the exedy sports organic/stage 1 clutch (same thing... i think) and fidanza al fly is a good combo. i'm assuming this means it's been done successfully before - fingers crossed.
initially i didn't want such a light flywheel, was after more like a 10 or 12 pounder but... f*** it! lol.
will let ya'll know how it goes
type r gearboxes and dc2 run diffrent clutches
when i got my spoon clutch and lightend flywheel installed into my dc2 they wouldnt fit into the standerd box but slided in like a glove to the type r one so be carefull make sure you order the right clutch for the right gearbox...ohhh and btw nathing but positives from me ona lightend flywheel
do you mean dc2 type-r & dc2 vtir are different?
stolen from ebay (U.S)...:
EXEDY STAGE 1 RACING CLUTCH KIT 08800B
CLUTCH:
Part Number: 08800B
Torque Capacity: 251 ft-lbs
Disc O.D.: 220 mm
Spline Teeth Count: 24
Application:-
1994-2001 Acura Integra (all models)
1999-2000 Honda Civic Si VTEC (B16 DOHC)
1994-1997 Honda Del Sol Si VTEC (B16 DOHC)
are you by chance running a b18b block from the GSI? or maybe a cable box?
Quote:
Originally Posted by AXS