breather pipe

I cant push the breather pipe back into the airbox, its giving me a CEL i think. Is it important ?

The rubber sealing around it is wayy too tight to push in, any ideas?

ok i managed to fit it in after tinkering, CEL is still on. what now? drive around for abit? lol

pull the negative battery terminal off, leave it for 15 minutes, itll reset the ecu, then put it back on and go for a drive

edit.

LOL ok that was noob. i dc the batt and it seems to be working fine. ;D

but I would reset the ECU.

http://www.ozhonda.com/forum/showthread.php?t=67113

^ removing the battery lead is one way of resetting the ecu beez ;)

But ya still need to let it idle for 5 minutes (dont touch anything),turn it off,then start it again though right?

Quote:

---

Originally Posted by beeza

But ya still need to let it idle for 5 minutes (dont touch anything),turn it off,then start it again though right?

---

No you don't. Unless you use the Honda HDS tester to delete the idle data.

So just take the negative connector off the battery,leave it for 10 minutes,connect it and go for a drive?

I thought u just leave it for 5mimns and t hen go driving :S

stop trying to make ur city go faster :P