welding advice

hey guys

i didnt know exactly where to post this but i need some advice please, im doing a jdm integra conversion, just wanted some advice on which is a good MIG welder to use, and what amp settings should be good for that thin sheet metal, also is there a difference in strength on gas or gassless

thanks in advance

use a gas mig welder if you can, just hire it if your just going to be using it for jdm front conversion
use the brand called cig, pretty popular,
depends what welder you are and what settings you are capable of

if you unexperienced i think you should practise on thin sheet of metal before jumping straight onto you car
probably start off with setting amp 1 and wire speed about 2-4, and just work your way up


if your experience crank it up to setting ampage 3, wire speed about 5-6

Quote:

---

Originally Posted by nerrrus

hey guys

i didnt know exactly where to post this but i need some advice please, im doing a jdm integra conversion, just wanted some advice on which is a good MIG welder to use, and what amp settings should be good for that thin sheet metal, also is there a difference in strength on gas or gassless

thanks in advance

---

http://www.mig-welding.co.uk/calculator.htm

this guy got heaps of tips. he's funny too haha.
http://www.youtube.com/watch?v=OZZiW...eature=related

hey thanks heaps.. im planning to practice heaps before i do it on the car..

thanks again