How to remove the standard head unit on 2009 honda odyssey RB3 std

does anyone know or did it? please share with me,having truoble with it, don't know where to start with:o thanks guys!

are you experienced with installing headunit? if not probably get a pro to do it.

anyway i got this off Alpine Japan site, since i don't have a RB3 i can't confirm if it applies to our car so use it as a guide only.

Attachment 17414

:thumbsup:

Please take some pic and make a DIY guide.

thanks

Should be similar as removing headunit on RB1 if using the JDM double-din console.

finally got the headunit, but does anyone know where the 12V signal wire for the reverse light in car? close to the dash area? cos i'm getting the wireless reverse cam for it, but it needs a signal to switch the headunit. thanks guys~

I believe my mechanic grabed mine from the gear shift lever

^^ yap, otherwise has to hard-wire all the way from reverse light

Mine was from reverse light as it's not wireless camera.

mine was from reverse light as well

I'm getting confused here. Is the wire for activating the HU or the camera itself? My HU is activated by the gear lever while the camera is activated by the reverse light. Mine is also not wireless, so I have a video cable running from the back to the HU to provide the picture.

ah you are correct. as far as i know on mine, power of camera from reverse light and camera signal (1 RCA wire) to HU. HU detected there is a signal from camera then turns to default AV mode for reverse camera. yeah, i'm pretty sure thats how it works.