I have an issue, seeming I want to get an armrest ek4 styles... However the recaro seats were made to retract but the retraction is actually on the inside of the seat hence the reason a problem
May arise when trying to move the seats back rest angle
Has anyone got some info and if this has been done before? Did it cause you any problems :)
http://184.72.239.143/mu/af201614-b70d-1d63.jpg
Thanks for the help!
Same goes with putting SR3 Recaros from a DC2R into a DC2 VTIR - I just switched the driver/passenger seats around so the adjustment knob is on the outside facing the doors.
It's a bit of a squeeze to adjust but it's better than not being able to adjust at all with the armrest in the way.
thought the adjustment knob is facing the door stock, coz two of my mates dc5r is lyk that but then my dc2r has it facing handbrake
Hm my dc2r seats are adjusting inwards lol don't really want to change the way it is can't be bothered .)
Hmm, guess I'll have to swap the seats around when I put the armrest in........Quote:
Originally Posted by geeang
This is a definite have to?
If you're putting in an armrest then you'll have to if you want to adjust your seats at all.Quote:
Originally Posted by Bludger
Lol it seems like alot of work just to fit armrests anyways I don't need to adjust them so when I find the console I'm gonna hit it up :D
Blastnpast - Just swap the 2 seats around.
in my itr i had installed a vtir arm rest as u have pictured above, and it was still okay to adjust leaving the adjuster inwards.....
all dc2r have the adjuster facing inwards from factory.....
Thanks for the feedback ill prob end up leaving the adjusters as they are :) I don't need to adjust the seat anyways they are perfect as they are :D armrest FTW
Hey Mods,
Please delete this as the info is not needed.
Thanks!