VSS (vehicle Speed Sensor)

Hey all,

Received my DC2R transmission today, and the freight guys broke my vss and won't replace it. Bastards.

Will my DC2 Vtir one work with it? it's the plastic plug that broke not the metal part. the input on the gearbox is ok.

here's some pics.

http://i582.photobucket.com/albums/s...r/DSC00247.jpg

http://i582.photobucket.com/albums/s...r/DSC00246.jpg

http://i582.photobucket.com/albums/s...r/DSC00248.jpg

come on guys! someone's gotta know!

any OBD1/OBD2 speed sensor will work....you need the spline / gear off your ITR gearbox tho....easy to swap it ( alittle pin half way up , then pull the entire shaft out and replace with your own.

Ive got a spare EK speed sensor if ya need it - $50 pm me.

I've still got my vti-r one in the car, so if need be I'll do the conversion you just mentioned. thanks bennjamin!

ummm, just a question, won't I have to mod the EK sensor anyway if I buy it off you? or do you mean as a spare incase I stuff it up?

thanks :)

good point - just offering if you needed a newer one !
Just chuck your vtir one in - take care when undoing the small 10mm bolt holding it in place - do NOT drop the bolt , or any other part into the hole as this will likely equal gearbox take apart. Not fun.