has anyne had any experience with bc coilovers? http://www.justjap.com/store/product...cat=422&page=2 cant seem to find too much on them an they seem like a okay option
Printable View
has anyne had any experience with bc coilovers? http://www.justjap.com/store/product...cat=422&page=2 cant seem to find too much on them an they seem like a okay option
If you just want to piss around on the street & track, they're fine.
Sure, you're not going to win any races, but you can set the ride height the way you want & your mates might be impressed.
They're basiclly a bottom shelf product and as long as that's what you're expecting, you'll be more than happy.
(Ie: Don't expect to recive a shock dyno test with them)
They're made by "Bor-Chuann" in Tiawan.
decent fitment, well priced, re-buildable
so bang for buck compared to other coilovers in same price category is good and better than most spring/shock setup or would that be a better option since i will mainly find a sweet spot for ride height and leave it there.
I got them, on 6 clicks they are very acceptable for street use, won't need spine reconstruction after driving on parra road
they are great coilovers beating most in price range, heres a shock dyno from a subaru forum on the
http://www.iwsti.com/forums/gd-suspe...ve-review.html
great read i think this is next on the shopping list! after smaller wheels! dont want the scrubbing to become worse than it is
I have been planning to buy these for a while. For a fully (well...) adjustable coilover, which is rebuildable in aus, they seem quite well priced. Though as someone pointed out they aren't top shelf, which I was expecting. Just need to find the funds.... haha
I got set on my ed9 crx feels good for the street but from what i read and heard from mates who trake there Bc racing coilover they sound like there too soft in spring rates and shock damper on hardest setting
I plan to upgrade to a set of tein or Spax's when i get new motor for racing
hi guys who rebuilds this coilovers in sydney??i have this coilovers but one of the front side is blown.. sorry to hijack your thread...
does anyone find the BR model really bouncy?