DC2 5 stun conversion question

Hello guys. I got an EK4 and planing to do 5 stun conversion on it.

I have checked on internet, the rotor and brake is same on ek9 and dc2(98-00 mode).

The ek9 5 stun caonversion is plug and play on EK4

I'm confusing is there any modify I need to do if I put dc2r 5 stun on EK4?

Should I need to get another suspension to fit dc2 5 stun(I'm using Zeal B6 on EK4)?

Thank you!:wave::wave:

be in mind that JDM 98spec DC2R has bigger drive shaft when compared to EK9 and AUDM DC2R
for the question, u dont need a new sussy setup

If I got a ek9 5 stun with 32mm alxe and JDM B18C-R 98 spec with 36mm alxe is ok with that??

Quote:

---

Originally Posted by snk99999

If I got a ek9 5 stun with 32mm alxe and JDM B18C-R 98 spec with 36mm alxe is ok with that??

---

is 32 = 36?

Quote:

---

Originally Posted by snk99999

If I got a ek9 5 stun with 32mm alxe and JDM B18C-R 98 spec with 36mm alxe is ok with that??

---

You just have to modify the outer CV joint to 36mm

Thanks for the information.

if ignore the alxe size. any other modify I need to do on dc2 5 stun conversion on my ek?

Thank you guys!