-
My 98 Civic CXI EK1
Hey Guys :) last updated 25/3/2012
This is progress of my car hope you like :)
Picked it up for 6gz back in May 2011 with 5months rego all 3 keys and full long book bone stock,had already electric windows only problem was it the idle would fluctuate but knew what the problem was already and fixed it when i got home :) and gave it a full service belts and all.
Engine: 1.6 D16Y4
Its manual :) these are the things that ive done since i got it :)
http://i786.photobucket.com/albums/y...m/IMG_1115.jpg
http://i786.photobucket.com/albums/y...m/IMG_1114.jpg
http://i786.photobucket.com/albums/y...m/IMG_0951.jpg
http://i786.photobucket.com/albums/y...m/IMG_0963.jpg
nice clean engine :)
http://i786.photobucket.com/albums/y...m/IMG_1335.jpg
Went to pick n payless and strip off the front sway bar from a GLI and the links and arms :)
http://i786.photobucket.com/albums/y...m/IMG_0949.jpg
http://i786.photobucket.com/albums/y...m/IMG_0960.jpg
yes thats legit kms lol installed a GLI Cluster so i can see my revs
Got some new 17"Advanti rims and Yokohama A539 tires
http://i786.photobucket.com/albums/y...m/IMG_1500.jpg
http://i786.photobucket.com/albums/y...m/IMG_1528.jpg
http://i786.photobucket.com/albums/y...m/IMG_1535.jpg
http://i786.photobucket.com/albums/y...m/IMG_1551.jpg
Ordered and installed the Type R front Grill,front lip,Gear knob also have the back lip but havent put it on yet
http://i786.photobucket.com/albums/y...m/IMG_1769.jpg
http://i786.photobucket.com/albums/y...m/IMG_1799.jpg
Ordered ebay headers and cat converter for 154 bucks delivered to my door :D then went down liverpool exhaust and got a 2inch high flow system cat back exhaust :)
http://i786.photobucket.com/albums/y...m/IMG_1817.jpg
http://i786.photobucket.com/albums/y...m/IMG_1820.jpg
unpacked and ready to install xD
http://i786.photobucket.com/albums/y...m/IMG_1847.jpg
changing colour,after a good run
http://i786.photobucket.com/albums/y...m/IMG_1900.jpg
only problem i found was they do sit low under the car
http://i786.photobucket.com/albums/y...m/IMG_1903.jpg
http://www.youtube.com/watch?v=MKsE_L76GPA
let me kno how it sounds :)
http://i786.photobucket.com/albums/y...m/IMG_2036.jpg
EK4 OEM Strut bar installed :)
http://i786.photobucket.com/albums/y...m/IMG_2228.jpg
OEM EM1 rear sway bar installed :D thanks blabla for the great sale :)
http://i786.photobucket.com/albums/y...m/IMG_2404.jpg
Tein H tech springs 1.3 drop on the front and 1.1 on the rear and scrubs when i drive out my driveway lol
Rear CF Wing and fog lights done :)
http://i786.photobucket.com/albums/y...m/IMG_2463.jpg
http://i786.photobucket.com/albums/y...m/IMG_2469.jpg
http://i786.photobucket.com/albums/y...m/IMG_2461.jpg
http://i786.photobucket.com/albums/y...m/IMG_2459.jpg
thats it for now :) feel free to comment and let me kno if you have any ideas on what i should do on the car next :)
-
-
Thats nice man. Where did u get the lips from? Do you have to spray them?
-
thanks :))))))))
thanks i got my lips of ebay because there cheaper to buy i got both front and rear lip for $145 delivered to my door xD and i havent painted them you can if you really waant to but i just left it for now :)
-
Hi mate ,
would you mind to share which eBay seller did you buy the header and CAT from? Also, lips from eBay too, how's the fitment?
cheers
-
no worries :)
front and rear lip http://www.ebay.com.au/itm/300539169...84.m1497.l2649
headers and cat http://www.ebay.com.au/itm/320704148...84.m1497.l2649 two problems i must warn you with the headers and cat first when i installed it they were pushed the stock exhaust a few inches back which was a pain to put in but i ended up cutting and welding a section just to get by before i got my cat back done the next day because it pushed the rest of the exhaust that far back it was rubbing on the fuel tank :s second problem is it does sit low and had to cut and weld a flex pipe to give it some movement and bend it up so the rest of the exhaust can sit nice and tucked away this is what i mean :)
http://i786.photobucket.com/albums/y...m/IMG_1831.jpg
-
Thanks mate :)
if i'm getting the header, i'll leave it to the muffler shop to do or the work. once again, thanks for the info, i'll pass it on to the muffler shop too
Cheers
-
by the way.
- feel any difference in power or toque after the new header put in?
- also, lip kits from eBay fit ok?
Cheers
-
hey man is the rear one on? i cant tell.
-
no worries glad to help :)
with a naturally aspirated engine its hard to feel the power but i think i freed up some extra HP and torque :) did it to make it breath better and all i really want was a little more sound and now i recon it sounds pretty sweet with the system i got :) not to loud not to quiet
but my civic doesnt sound like a civic if you have heard it haha
the front lip pretty easy 4 self taping screws and the rear i havent had time to put it on but heard its a little harder havent tried yet lol
-
Hellomotog its not at the moment havent had time to put on
-